ATV Ramps - Mad-Ramps

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

We definitely have options to flat tow your 2021 Chevy Silverado 2500 and the following will be some recommendations to get you on the road. With that being said, I included some review and install videos of these recommendations for you to check out…

Hey Jeremiah, The Flint Hill Goods Arched Ramp Set #FHG83ZR can be used with a max height of 25". If you need something that works with more height then you'll need the Arched Loading Ramp Set #288-07432-2 which can work with a 35" max…

Hey Jason, The individual ramps from the Flint Hill Goods Arched Ramp Set #FHG83ZR weigh in at 14.5 lbs so combined you're looking at 29 lbs.

The correct replacement for your Power Gear 522176/8730 is #LC383745.

The replacement motor you need for your Tiffin part #8730 is the Lippert Replacement Gear Motor Assembly #LC383745 .

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…

Hey Dan, thanks for reaching out. So I do have a solution that I want to run by you, but sadly, we do not offer a class 1 cargo carrier that has a built-in ramp. We do have a class 1 cargo carrier though, the Curt 19x47 Curt Cargo Carrier #C18110.…

Hey Taylor, The 3,000 lb weight rating of the Flint Hill Goods Arched Ramp Set #FHG83ZR is for both ramp combined. Each ramp has an individual weight rating of 1,500 lbs so combined it's 3,000 lbs altogether.

What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…

I went to our warehouse and laid flat one of the Stallion ramps in the set #288-07489. The tallest point in the arch is where the yellow safety sticker is placed and at this tallest point the height (or thickness, if you prefer) is 3-3/4-inches.