Demco Autoslide 5th Wheel Trailer Hitch for Ford Super Duty - Single Jaw - Above Bed - 18,000 lbs
This item does not fit your vehicle
2017 Ram 3500
These items fit your vehicle
2017 Ram 3500
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The automatic sliding design gives you 14" of extra clearance when you turn, so you can maneuver your fifth wheel safely without getting out to pull a lever. The rack-and-pinion gear system moves smoothly and in sync with your truck’s motion, gliding the hitch head backward when you make a slow-speed turn and returning it forward when you straighten out. This controlled action means tight campsites or parking lots are no problem—you just steer and the hitch does the rest.
The one-piece wraparound jaw completely surrounds the king pin for a full 360° connection. A 3/4" solid steel locking bar reinforces that grip, automatically locking into place as the jaw closes. The result is a quiet, secure feel with minimal rattle or chucking on the road. You can tow confidently knowing your trailer is firmly coupled and ready for long hauls.
The double-pivot hitch head moves both front to back and side to side, so it lines up naturally with your pin box during hookup. Three polyurethane dampeners cushion the motion of the head to soften road shock and help cut down on noise while towing. It makes the ride smoother and less jarring, especially on uneven pavement or long stretches of highway.
This heavy-duty steel hitch is rated for 18,000 lbs gross towing weight and 4,500 lbs vertical load limit. The powder coat finish helps resist rust over time, keeping it durable from season to season. Three adjustable height settings—16-1/2", 17-3/4", and 19-1/4"—let you fine-tune your setup for balanced towing and proper bed rail clearance.
Installation is simple thanks to its pre-assembled base and clear mounting points for the included above-bed rails and brackets. The spring-loaded handle has a tethered safety pin that locks easily in either position, open or closed, so coupling is quick and frustration-free. Once mounted, everything feels sturdy and tight—a solid setup that’s ready to tow when you are.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we'll take a look at this replacement head and base assembly for the Demco Hijacker Autoslide 5th Wheel Trailer Hitches. This has an 18,000 pound gross towing weight capacity. This part will replace the head and the base assembly on your Demco Hijacker Autoslide 5th Wheel Trailer Hitches. It is designed to fit the Demco 5th Wheel Hitches part number DM8550022, part number DM8550024, and part number DM8550034.
All three of those hitches, we do sell separately on our website.This part is just for the head and the base assembly. It does also require side plates to install this into your truck bed, and those side plates bolt onto the side of the base right here. The side plates are what will allow you to drop this hitch into either a universal above-bed base rails, or into the Demco or Ford factory under-bed mounting systems. Those side plates, we do sell separately on our website. Just to show you, you can see these multiple holes here on the side of the base.
This is where the side plates will bolt to. When you go to install them, they will allow you to get you the correct hitch height, and also for what application you need for whatever connection points you have in your truck bed.This is an automatic slider, so it will provide clearance required for your short bed truck to turn safely at slow speeds. No more having to get in and out of your truck to operate a manual slider. This will automatically slide far to get you the clearance. It has this rotating hitch head here that'll turn up to 90 degrees with your trailer.
The re-rotation creates the force that'll activate the automatic slider. Once you have your trailer hooked up here and there's weight on it. Right now, I can't really show you how it rotates because there's not any weight on it. If you get enough weight on it, what'll happen is this head will slide towards the tailgate when you start to turn with your truck. As you keep turning, this'll rotate to get you the clearance and then slide back to get you more clearance.
Then, it'll come back towards the cab when you straighten out your vehicle and your 5th wheel.Basically, what it'll do is it'll give you 14 inches front to back amount of travel for clearance. It does use a nice roller and guide assembly here to create smooth and controlled movement. This is designed to fit standard pin boxes from 12 inches wide to 14 inches wide. The built-in brackets right here is what will stabilize that pin box, so it won't rotate in your hitch. There's no need for a separate capture plate for your standard nine cushion pin boxes. On the cushion pin boxes, they do require locking plates, which we do sell separately. The cushion pin boxes that they're required on is the Glide Ride, the MORryde, the Trailair Tri Glide, the Trailair Flex Air, Rota-Flex, and the Fifth Airborne.The head on this uses a nice wraparound single piece jaw, provides a secure connection, gives you a 360 degree jaw to kingpin contact, and that will give you less rattle and more security than slide bar jaws. Also, if noticed on this one, it gives you a nice three quarter inch thick solid steel locking bar in front here. This will reinforce the connection of your coupled trailer, and that will automatically lock into place when the jaw closes. I am going to show you how this jaw operates at the end of the video. I'm going to show sliding a kingpin in and how it all works.The head itself is a double pivot hitch head, eases hook-up, helps limit chucking. It'll pivot front to back and side to side, and they do use cushioning polyurethane dampeners underneath to help reduce noise and absorb road shock. The handle on it is a nice spring loaded handle. It has a nice comfort grip, allows for simple coupling, has the tethered safety pin right here to let you secure the handle when it's either closed or open. Right now, it's closed. If you need to open it, you just remove that pin, pull your handle out, and that'll lock in the open position, and you're ready to couple. Once it couples, it'll slide in and lock. To finalize it, all you have to do is drop your pin through, clip it, and that'll secure it.This is a sturdy, steel construction. Has a nice rust resistant black powder coat finish on it. It is made in the USA. The specs, it is designed for use on six and a half inch truck bed lengths, gross towing weight capacity is 18,000 pounds, and the vertical load limit is 4,500 pounds. As I mentioned, I do want to show you. Here's an example of what the kingpin would be like on your fifth wheel. When you're ready to hook up, what you want to do is remove your pin and clip. As I mentioned, pull your handle all the way out. Once you get it out far enough, it'll lock in the open position. You can see the jaws ready to accept the kingpin. When you go to back up and hook up, as that kingpin slides in on the hitch head, once it gets in there far enough, it'll let that jaw wrap around it 360 degrees. Then that locking bar, you can see, slides across and keeps it in there.It's very secure. It won't move at all. To finalize it, all you have to do is take your pin and clip, drop it through the hole that lines up, clip it, and then that holds the handle. To unlock it or unhook it, you just remove your pin and clip, pull your handle out, and that'll allow the kingpin to side right out. That should do it for the review on this replacement head and base assembly for the Demco Hijacker Autoslide Fifth Wheel Trailer Hitches, and this has an 18,000 pound gross towing weight capacity.
Ratings & Reviews
John
7/17/2023
Still working great!
Jimp
9/5/2019
Still loving it. My only complaint definitely a 1st world problem! is that the unit takes up a lot of space in our bed when were not using the trailer. I solved that issue with a cheap chain hoist, attached to a beam in my garage. Now when we return from a trip and know were not going to use the 5th Wheel for a while, I just hook up the hoist and pull it out. Simple solution to my only issue with the Demco Hijacker.
Glenn
7/11/2021
Works Flawlessly
Mark C.
1/20/2020
Its been a year and I would not hesitate to purchase again.
Mike L.
3/6/2019
The hitch is indeed heavy. If you have a chain hoist available, using a lifting bracket like part # DM6100 see link would certainly make installing and removing the hitch much easier.
Helpful Links
Heather A.
8/14/2018
This demco hitch part DM8550034 is a completely gear driven hitch. Whichever angle you uncouple at is the same position the head will stay in until it is coupled back up. It is a good idea to couple up at as straight of an angle as possible. If there is ever a situation where you have to uncouple at an angle you can physically turn the head back to a straight position by taking the head off the hitch and putting a straight bar through the assembly for some leverage. The head should not be swiveling during coupling unless the main bolt is loose. The bolt that holds the gear assembly together has to be torqued to the specific foot lbs in the installation instructions or the head may swivel and cause issues during coupling. That bolt is part 05366 in the instructions.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike G.
9/15/2019
This hitch has worked well for me. It is now used in a 2018 GMC Sierra 2500. It is just tall enough that I can see it in my rearview mirror to make it easy to get lined up with the kingpin