To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Tow up to 20,000 lbs with this heavy-duty fifth-wheel trailer hitch. Interlocking jaws and a color-coded lock indicator provide safety. Torsion head offers easy hookup and quiet, stable towing. Rails and installation kit included.
Features:
Specs:
Note: This fifth-wheel hitch is compatible with rotating pin boxes, such as the first generation Reese Sidewinder, Reese Revolution, and 5th Airborne Sidewinder, only when used with a wedge (sold separately).
Unlike slide-bar models, the rounded, interlocking, two-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Get peace of mind with Curt's color-coded lock indicator. Just look at the indicator - either the one on the handle or the one on the hitch itself - to determine whether the jaw is in the correct position to uncouple (red), couple (yellow) or tow (green).
Alternate Instructions
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Curt A20 dual-jaw fifth wheel trailer hitch with a 20,000 pound weight capacity. Now, this fifth wheel hitch will mount in your truck bed so that you can tow your fifth wheel trailer. It uses the interlocking two-jaw system right here, which provides a nice 360-degree jaw-to-kingpin contact, and because of that it'll give you less rattle, more security than your slide bar models. Also, on the front of each jaw, over here and over here, you can notice there's two built-in grease zerk fittings, which will give you easy lubrication of the jaws. This hitch does use a fully articulating torsion head for controlled coupling and a nice stable, quiet ride. It will self-align for easy hookup, and helps suppress road shock to reduce any bothersome towing noise. The handle right here is a lockable handle.
It's a very short-throw single-handle operation. The nice thing about it, also, it does self-reset to the ready-to-couple position after uncoupling. Now, when you put this together, when you mount the crossmember to the legs, there's three rows of holes on the crossmember, so it actually will give you a four inch hitch height adjustment. The hitch height would be measured from your truck bed to the top of the hitch head, and you want that to be as close as possible, so when you're towing your fifth wheel with your tow vehicle, you want those level. It gives you three choices, anywhere from thirteen inches of hitch height adjustment up to seventeen inches. One of the nice features on this is the three-point indicator system. It'll tell you what position the jaws are in.
What's nice about it is that it's color-coded. Let me just swing this around so you can be able to see. If you notice, right under the hitch head, right here, you'll notice right now it's showing solid green. That means the jaws are completely closed. If we had a kingpin in there, the green would mean you're ready to tow.
This color coding will tell you if the hitch is ready to uncouple, couple, or tow. What's nice about those colors and looking, if you're in the cab, the cab would be right here, you can turn around as you're hooking up or uncoupling and watch the color, and when it changes, it tells you the position of the jaws. Basically, the green, like it is now, the jaws are locked closed; it's safe to tow. If it goes to yellow, let me just unhook this and pull out the handle. You can see right now, because I opened the jaws, it's showing yellow. Yellow means the jaws are ready to couple.
It's safe to back in the truck to couple up to your fifth wheel. It if would show red there, that means the jaws are locked open, and it's safe to pull your truck away. When it's red, you do not want to couple. Also, this has a nice fast one-pin head removal, makes it very easy for one person to remove the hitch. Back here, there's a clip you can pull out, and then you can pull this large pin out, and that'll allow you to take the head out of the crossmember so you can take it apart in pieces, which makes it easy for one person to remove the hitch. Also included with this . Let me roll this around here. There we go. Included with this, I have laid out, comes with the plastic loop plate right here. This plastic loop plate will go onto your kingpin and lets the kingpin glide smoothly into the hitch during hookup. Also comes with, you can see, the pins and clips for attaching the legs to your base rails. This is a simple installation with base rails and an installation kit. Now, the base rails and the installation kit we do sell separately on our website. I would recommend to go to our website, use our fit guide, put in your year and model vehicle, and it'll show you the correct base rails and installation kit for your application. This fifth wheel hitch is compatible with B and W, Curt, Demco, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley above-bed base rails. This is a sturdy steel construction with a durable carbide powder-coat finish. Again, the specs on this. The gross towing weight capacity is 20,000 pounds. The vertical load limit or pin weight capacity is 5,000 pounds. We had mentioned the hitch height adjustment from thirteen inches to seventeen inches. What I'm going to do now is, we already have the jaws open, ready to couple, showing yellow, so what I want to do is here's an example. This is what a kingpin would look like on your fifth wheel. When you go to hook up, your kingpin would slide in between the two jaws, just like this, and once you get it far enough, your jaws will completely wrap around the kingpin. You notice the handle automatically slides up. The holes line up, so you just take your pin and clip, drop your pin into the hole, clip it, and that'll lock the handle. Now, the hole is large enough, you could actually put a padlock on there if you wanted extra security. It does come with this attached pin and clip. With the handle locked, you look back here at the color, it's showing green. That means you're all ready to tow. Again, to uncouple, you just pull your pin out, open it back out, and go, be able to back right out. That should do it for the review on the Curt A20 dual-jaw fifth wheel trailer hitch with the 20,000 pound weight capacity.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.