To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 20,000 lbs gross towing weight and 5,000 lbs tongue weight, giving you the strength to pull large fifth-wheel trailers with confidence. The sturdy steel construction and carbide powder coat finish make it solid and durable for heavy-duty towing. It mounts above the bed rails for a secure setup that feels locked in mile after mile.
The rounded, interlocking two-piece jaw wraps completely around the king pin for full 360-degree contact. That tight connection keeps the trailer steady with less rattle and movement compared to slide-bar designs. The result is a quieter, smoother ride and a more confident hookup every time you tow.
A quick look at Curt’s color-coded indicator tells you exactly what’s going on—red for uncoupled, yellow for ready to couple, and green when you’re locked for towing. The indicator can be seen from the cab or at the hitch, so you always know your status before pulling away.
The fully articulating torsion head absorbs road shock and helps suppress towing noise. It self-aligns as you back in, making hookups easier and keeping your ride stable and quiet over rough roads. It’s a setup that feels controlled even when hauling heavy loads across long distances.
When it’s time to clear out the bed, you can lift off the head by pulling a single pin—no tools needed. The design makes it possible for one person to remove the hitch when not towing, so switching from tow mode to open bed space is simple.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Curt A20 dual-jaw fifth wheel trailer hitch with a 20,000 pound weight capacity. Now, this fifth wheel hitch will mount in your truck bed so that you can tow your fifth wheel trailer. It uses the interlocking two-jaw system right here, which provides a nice 360-degree jaw-to-kingpin contact, and because of that it'll give you less rattle, more security than your slide bar models. Also, on the front of each jaw, over here and over here, you can notice there's two built-in grease zerk fittings, which will give you easy lubrication of the jaws. This hitch does use a fully articulating torsion head for controlled coupling and a nice stable, quiet ride. It will self-align for easy hookup, and helps suppress road shock to reduce any bothersome towing noise. The handle right here is a lockable handle.
It's a very short-throw single-handle operation. The nice thing about it, also, it does self-reset to the ready-to-couple position after uncoupling. Now, when you put this together, when you mount the crossmember to the legs, there's three rows of holes on the crossmember, so it actually will give you a four inch hitch height adjustment. The hitch height would be measured from your truck bed to the top of the hitch head, and you want that to be as close as possible, so when you're towing your fifth wheel with your tow vehicle, you want those level. It gives you three choices, anywhere from thirteen inches of hitch height adjustment up to seventeen inches. One of the nice features on this is the three-point indicator system. It'll tell you what position the jaws are in.
What's nice about it is that it's color-coded. Let me just swing this around so you can be able to see. If you notice, right under the hitch head, right here, you'll notice right now it's showing solid green. That means the jaws are completely closed. If we had a kingpin in there, the green would mean you're ready to tow.
This color coding will tell you if the hitch is ready to uncouple, couple, or tow. What's nice about those colors and looking, if you're in the cab, the cab would be right here, you can turn around as you're hooking up or uncoupling and watch the color, and when it changes, it tells you the position of the jaws. Basically, the green, like it is now, the jaws are locked closed; it's safe to tow. If it goes to yellow, let me just unhook this and pull out the handle. You can see right now, because I opened the jaws, it's showing yellow. Yellow means the jaws are ready to couple.
It's safe to back in the truck to couple up to your fifth wheel. It if would show red there, that means the jaws are locked open, and it's safe to pull your truck away. When it's red, you do not want to couple. Also, this has a nice fast one-pin head removal, makes it very easy for one person to remove the hitch. Back here, there's a clip you can pull out, and then you can pull this large pin out, and that'll allow you to take the head out of the crossmember so you can take it apart in pieces, which makes it easy for one person to remove the hitch. Also included with this . Let me roll this around here. There we go. Included with this, I have laid out, comes with the plastic loop plate right here. This plastic loop plate will go onto your kingpin and lets the kingpin glide smoothly into the hitch during hookup. Also comes with, you can see, the pins and clips for attaching the legs to your base rails. This is a simple installation with base rails and an installation kit. Now, the base rails and the installation kit we do sell separately on our website. I would recommend to go to our website, use our fit guide, put in your year and model vehicle, and it'll show you the correct base rails and installation kit for your application. This fifth wheel hitch is compatible with B and W, Curt, Demco, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley above-bed base rails. This is a sturdy steel construction with a durable carbide powder-coat finish. Again, the specs on this. The gross towing weight capacity is 20,000 pounds. The vertical load limit or pin weight capacity is 5,000 pounds. We had mentioned the hitch height adjustment from thirteen inches to seventeen inches. What I'm going to do now is, we already have the jaws open, ready to couple, showing yellow, so what I want to do is here's an example. This is what a kingpin would look like on your fifth wheel. When you go to hook up, your kingpin would slide in between the two jaws, just like this, and once you get it far enough, your jaws will completely wrap around the kingpin. You notice the handle automatically slides up. The holes line up, so you just take your pin and clip, drop your pin into the hole, clip it, and that'll lock the handle. Now, the hole is large enough, you could actually put a padlock on there if you wanted extra security. It does come with this attached pin and clip. With the handle locked, you look back here at the color, it's showing green. That means you're all ready to tow. Again, to uncouple, you just pull your pin out, open it back out, and go, be able to back right out. That should do it for the review on the Curt A20 dual-jaw fifth wheel trailer hitch with the 20,000 pound weight capacity.
Ratings & Reviews
It fit my truck and’s was exactly what I needed
Perfect fit,easy installation I’m happy with the product.
Product was great, installation instructions were well written and easy to follow.
I think after using it for about 5,000 miles of pulling our fifth wheel there must be a better system out that reduces the expected jarring from the movement of the hitch due to needed clearance to use pins.
I might have the hitch welded to the rails or find one that is not removable.
If you have a solid mount hitch, please let me know.
Simple install, didnt have to drill frame ,seems to be very heavy duty
Before even starting the install I was sure to read the directions a couple of times to make sure this was something I wanted to attempt on my own. I hadn't installed a hitch before but had assumed since it was a custom kit it wouldn't be too difficult. The directions stated that the total install time for the diy'er was 180 mins. I read through and took note of all the tools I was going to need. What I would have REALLY appreciated was a "tools required" list at the top of the instructions. I thought I had all the tools needed but at the very end when you get to the rear rail you need a 7/8" bit for the bottom of the bed support. I advise you have one at the ready. I had to hone it out with my 9/16 which was a giant pain. Everything else went really smooth. On my particular application I had a real hard time torquing the front right bed bolt on the rear rail to spec (110ft-lbs) as the mount for a cross-bar makes it nearly impossible to fit a torque wrench in. (I ended up having to use 3/8" drive extensions to go up inside the bucket and torquing it from the bottom.
Total time:(including a couple of breaks, meltdowns, and a bunch of swearing and a 2yr old hiding dad's parts) 180 mins. Touche' Curt Mfg., touche'...
Experience level of installer: None
This is something that the average person can do. Make sure to watch all the helpful videos here on etrailer.com, read through the directions before starting, and make sure you have all the necessary tools to help ensure your installation goes as smooth as possible.
Haven't had a chance to use the hitch yet but I got it installed without too much trouble. It took about 4 hours to install, the frame mounting brackets and rails, at a leisurely pace. The unit seems to be very sturdy and it is certainly built heavy. I'm looking forward to testing it out soon.
I haven’t installed yet, but looks to be very good quality and good installation instructions
Smooth transaction,Celiese made it very easy to order .
Great fit and product easy install did it in the dirt on drive way with no issues on 2016 Ram 2500
Shipping was extremely fast and all the extra information that can with the products I purchased made the entire experience that I would return for and refer friends to.
Install was easy and the hitch performs perfectly. I have ZERO complaints. Even a year later, it performs great.
Overall a great hitch. Couple of minor scratches. Like the easy disassembly to be able to install/remove from truck alone.
Excellent product. It took about 6 hours to install. The customer service is second to none and is highly recommended.
Love it. Easy to take apart and move! The instructions were very clear on how to assemble. I pull a 43ft camper and have yet to have any problems! Well worth the $$
Very nice piece!Arrived sooner than expected. I have the A16 version,that I used for a 10k Lbs 5th wheel and that handle very well but now I'll be towing a 16k tow hauler so I know this a20 will do just fine. And I love the locking jaw versions. I feel these are most secured in any type of towing.
The installation Kit for the Ram Truck was great. Had it installed within 3 hours and ready to use. picture is attached.
the service from etrailer was just great. Order shipped the same day and I had it on the 2nd day.
Excellent hitch, took two of us 10 minutes, during a rain storm lol, to put together and install! As far as towing our Redwood 5th wheel it performed flawlessly, easy to hook up and the ride was super smooth and no noticeable bucking!
I already had a curt goose neck frame mounted in truck so I used the Curt adopter plate # 16220 an the A 20 curt 5 wheel hitch assembly was very easy with no issues looking forward to putting it to work with my G M C 3500 also purchased a curt bumper dual ball adjustable hitch
Great people, great service and great products. Installation went as smooth as one could wish for with no mistakes thanks to the helpful advice given in the videos. Etrailer will be my only source for my trailer and hitch needs. A special thank you to Katherina.
Thank you for such a fine product!! We installed the fifth wheel hitch in my 2015 RAM 2500 Mega Cab without any problems. It took us 5 hours to complete the installation and all the brackets and bolts went in without an difficulties!!
A little tight to get into but overall a pretty simple straight forward install. Great quality and heavy duty material.
Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver.
The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision!
I Would recommend both etrailer and this hitch if you are looking to change out!
Hitch came packed well even though the box looked banged up. Everything was still undamaged and in good usable condition, just minor scuffs. I think this unit will have more when I get done with it. Watched a you tube video from curt on installation and had little trouble installing the hitch following the enclosed guidelines. Everything lined up according to plan. I think the hardest part was getting access by the heat shield. Tough spot to work on but I had help from a younger, more adapt helper who was able to manage just fine. A creeper for underneath was super handy and a 6 foot ladder to climb in and out of the bed made it a whole lot easier. Really did not need to use a lift. Would have made it a bit harder to work in the bed. My truck is quite high which allowed nice working space underneath.
From start to finish the experience was very enjoyable. The customer service team was amazing and everything happened just as promised.
The same hitch at my local trailer store cost much more.
Would definitely recommend etrailer to anyone.
I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.
Dave
6/20/2021
Curt A20 still performing flawlessly.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Harold
3/18/2025
Couldnt be happier with this purchase. It really is perfect for our needs. 2019 F350 LWB pulling 45 5th wheel.