Replacement BullRing Retractable Tie-Down Anchors for Truck Bed Inner Stake Pockets - Qty 2

Video Transcript for Review of BullRing Replacement Flush Retractable Tie Down Anchor For Inner Stake Pocket - BU94FR

Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these replacement BullRing, Flush Retractable tie down anchors for your truck bed, inner stake pockets. These are going to replace missing or damaged heavy duty anchors that attach to your inner truck bed stake pocket set, which can be found on our website using the item numbers that you see on your screen. And those item numbers are for different quantities. And these retractable anchor points are going to install to your inner truck bed stake pockets and provide tie-down points to secure your load.

These will fit in the rear and middle stake pockets for trucks with a toolbox. And the retractable design is going to let you easily snap the rings up, as you see here, and then down, letting you keep the rings out of sight when they are not in use. As you can see, these are very easy to use. And when these are installed, and you don't need the ring they're just going to be flush and not in your way. And when you're ready to use them, you just simply pull it firmly and it clicks into place.

And that ring is gonna be very secure. It's not going to slip back in accidentally and it's gonna be ready for you to attach your straps. The angled anchoring provides a better pull angle and more strength. And these anchors have a weight capacity of a thousand pounds. They're constructed of stainless steel.

So that's gonna resist rust and corrosion. And this nylon lower body is going to reduce sound. Now these are going to be very easy to install. So what you would do is just remove the GM plastic cap and then you're going to remove the screw from the anchor and for our purposes here today I've went ahead and loosened the screw. So let me go ahead and just remove this.

So you just remove the screw, and then what you're going to do then, is while you're holding the top plate here you are going to guide the lower body and this resistance plate into the truck side wall opening. So you're going to lift up and guide the backing plate into that metal opening. And then once you have those pieces in that opening you're going to lift, you're going to pull outward on this stainless steel ring and allow the cover to drop into place, and then you're just going to insert this screw and tighten it up and you will be ready to go. It's gonna be very simple, very quick installation. I do wanna mention though, that you wanna be careful that you do not over tighten the screw. You just wanna hand tighten it and you will be good to go. Now these do have a lifetime warranty and these will include two tie down anchors. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..