6-1/8" Diameter. Low-profile dome light illuminates your trailer's interior with bright white light. Low-voltage cutoff prevents battery drain. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire pigtail.
Features:
Specs:
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 250 raw lumen capacity and produces 214 effective lumens.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Opti-Brite LED dome light from Optronics. This is a low profile round dome light that's going to provide bright white light for your trailer's interior. It's going to feature a low voltage cut-off at 11 volt DC power which is going to help prevent battery drain. That's a full LED system. LEDs are going be a great replacements for incandescent lights. They last much longer, they burn brighter, they're more efficient, you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. The unit does feature a sealed waterproof construction, it's going to feature a poly-carbonate lens and housing with the white LEDs, with a nice clear lens. This is a surface mount installation so it mounts on the surface of your trailer with a built in mounting flange.
That's going to contain 3 mount holes, one right here, one right here and one right here. Hardware is not included. That is compatible with 12 volt DC and 24 volt DC systems. It's got a 2 wire design here on the back, it's got a nice protective sleeve on it but you're going to have your white wire and your black wire. White wire's ground, black wire is power. On the end, they're going to be your .180 male bullets.
This can be cut off and the wires can be stripped back a little bit for hard wire applications. Few measurements to go over with you real quick. We're going to take a look at the overall dimensions with the light starting with the overall diameter. So we're going to measure from outer edge to outer edge and that's going to give us a measurement of about 6 and 1/8 of an inch. The depth from very back to very front is going to be pretty close to 5/8ths of an inch thick or deep. The light area itself, so just this diameter right here is what we're measuring, that's going to give a diameter of about 4 and 3 quarters of an inch.
When it comes to the mounting holes, these are going to be separated on center or apart from one another, right on 4 and 3 quarter inches, it's going to be the same distance between each mount hole, again, there's going to be 3 of those. The unit contains a total of 21 diodes or 21 LEDs. We're going to go and hook up to our power source, that way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights so you can see it in a low light setting. So, here you can see all the diodes, all the LEDs, that's a nice really bright light. Again, 21 LEDs of a multi-diode design really helps optimize the light output. The unit has an effective lumen output of 214 lumens with a raw lumen output of 250.
The power draw at 12.8 volts is 0.408 amps and at 24 volts is 0.385 amps. Optronics is also going put a lifetime warranty on the LEDs. That's going to do it for today's look at the Opti-Bright LED Dome light from Optronics.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
6-1/8" Diameter. Low-profile dome light illuminates your trailer's interior with bright white light. Low-voltage cutoff prevents battery drain. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire pigtail.Quick delivery, excellent customer service and a product meets my expectations with plenty of lumens for a small bathroom. Easy installation but does not come with mounting screws.
ARRIVED SOONER THAN INFORMED, EXCELLENT SERVICE, QUALITY PRODUCT. WILL FOR SURE BUY MORE STUFF, THANK YOU.
Excellent light it really brightens up the inside of my Little Debbie truck. Would buy again!!
product arrived quickly and works like a champ in my bike trailer
Product was delivered quickly and works great. Happy with service and product
very happy with product and service. Thank you,
Do you have a question about this RV Interior Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.