Hitch Availability for a 2001 Ford E450 Shuttle Bus

Question

Question:

Will this Item also fit the E450 Chassis? I Have a 2001 E450 Shuttle Bus Goshen Coach and I would like to add a hitch. My 2013 F350 has a 2 12 and I would like to be able to use the same Heavy Duty Ball mounts if possible.

asked by: Bill N

0

Expert Reply:

I have a Class V hitch that would fit your 2001 E450 Chassis, part # 41945. However, due to the large overhang of your vehicle because of the shuttle bus portion of the vehicle it is kind of hard for me to say for certain. The best recommendation I can make would be for you to check out the install video and instructions and compare them to the rear frame of your vehicle to see if they would be compatible.

expert reply by: Jameson C

0

Answer 1

Depending on the window style and size. I would suggest either the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall #SR43FR or the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hello David, The reason it’s $1000 more is because of the whopping 0.2 cu. ft. of extra space..... just kidding! The main difference comes down to the exterior and features. The #GE48FR has a sleek glass front that gives it a glossy, modern look,…

view full answer...

Answer 5

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C15845 that you referenced is a confirmed fit for a 2016 Ford F-550 cab and chassis with frame rails spaced 34" apart (outside to outside). However, Curt does not test this trailer hitch with dump body…

view full answer...

Answer 7

Hello Lyle; the Redarc Tow-Pro Liberty #RED24FR is my favorite brake controller so I think that is a great choice. With the factory tow package you should have a port under the dash that allows you to plug in the brake controller for installation…

view full answer...

Answer 8

When installing a trailer hitch on your 2021 Ford F-550 Cab and Chassis The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2 inches #C15845 will be a good upgrade. Per the manufacturer the distance from the rear frame mount…

view full answer...

Answer 9

The correct hitch plate for your 1995 Ford F-350 cab and chassis (these hitch plates will not work with pick-up trucks) is the Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A, Buyers Products Hitch Plate with 2-1/2"…

view full answer...

Answer 10

Please refer to the included images I made showing measurements for Curt trailer hitch #C14048. This hitch is designed to fit 1999 to 2016 Ford cab and chassis model trucks. Those are the trucks sold without a bed and are then turned into service…

view full answer...

Answer 11

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it meets.…

view full answer...

Hitch Availability for a 2001 Ford E450 Shuttle Bus

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching