See what our Experts say about this CURT Heavy Duty Receiver Hitch

• 20,000LB Trailer Hitch Receiver Options For a 2022 Tiffin Allegro Bus Motorhome With Tag Axle
  I do have some weld-on options for you as I unfortunately do not have any custom fit bolt on options and I cannot look at the detailed specs for your 2022 Tiffin Allegro Bus 45 OPP Motorhome. We have 2 sets of the Curt Class 5 receivers with either a 44" or 62" wide receiver tube which are all rated for up to 20,000lbs trailer weight and 2,000lbs tongue weight. You will need to select the correct width based on your frame and the amount of drop you will need to clear any rear fascia panels....
  view full answer...
• Where Does Converter Box of Curt C79CR Mount on 2022 Subaru Legacy
  The instructions for the Curt trailer wiring harness part # C97CR are a little unclear but basically the box does not get mounted inside the vehicle and instead mounts behind the bumper which you can see pointed out in step 7.
  view full answer...
• Trailer Hitch Option For 2015 Freightliner Cascadia 125
  Since there isn't going to be a custom-fit hitch for your 2015 Freightliner Cascadia 125, what you'll need is a weld-on application. This will work so long as the frame of your truck is between 18 inches and 62 inches wide. There are a couple of options, depending on the drop you need: - 18 Inch Drop: Curt Class 5 Universal Weld-on Hitch - 2-1/2" Receiver # C59CR - 9 Inch Drop: Curt Class 5 Universal Weld-on Hitch - 2-1/2" Receiver # C97CR
  view full answer...
• 2006 E-450 Super Duty Shuttle Bus Trailer Hitch Receiver
  For your 2006 Ford F-450 Shuttle Bus you are going to need to use a universal hitch. For this you will need to measure how wide your frame rails are apart on the rear of your bus. Then you will need to know how much drop from the frame rails to the bottom of the bumper is required for the hitch to fit. The Curt Class 5 Universal Weld-on Hitch # C47CR will fit frames that are 18"-44" wide and brackets have a 9" drop. The Curt Class 5 Universal Weld-on Hitch # C99CR will also fit frame...
  view full answer...
• Recommended Trailer Hitch for a Thomas Saf-T-Liner School Bus
  The best option to add a hitch to your 2006 Thomas Saf-T-Liner School Bus is going to be the Curt Class 5 Universal Weld-on Hitch w/ Brackets item # C97CR. This is a universal hitch that fits frames from 18" to 62" wide. This is our highest rated universal hitch and it has a 20,000 lbs towing capacity. The included brackets will drop of 9" from your bus's frame. There are no custom fit hitches for your Thomas Sf-T-Liner and this is going to need to be welded to your frame for the capacity...
  view full answer...
• Hitch For C5500 GMC Truck
  For a commercial vehicle such as the GMC C5500 you will need an universal hitch such as the Curt # C97CR Class-5, with 2-1/2” receiver, and fitting frame beams 18” to 62” in width with a 20,000 pound tow capacity. If you do not need one as wide you could select the 44” wide Curt # C37CR, or the 44” wide Curt # C99CR hitch with an 18” drop and 16,000 pound tow rating. I have included links to each of these items.
  view full answer...
• Trailer Hitch Receiver Fit on 1998 Chevy 3500 Cab & Chassis
  A stake body should be referring to a cab and chassis, and we do have a trailer hitch receiver that fits a 1998 Chevy 3500 cab and chassis. You just need to make sure that your frame measures 34 inches outside to outside, and if it does then the correct hitch is the Curt Trailer Hitch Receiver # C14082. If your '98 Chevy has a frame which is not 34 inches wide, you can still add a hitch, but it would need to be a universal weld-on application. The correct one would depend on the exact...
  view full answer...
• Option For Hitch With at Least 10k Capacity For 2000 Prevost H345
  There are no custom-fit hitches for your 2000 Prevost H345, so the only thing you may be able to do is use a universal, weld-on hitch, such as the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 62" Wide # C97CR. This will work with frames that are between 18 inches and 62 inches wide, and has a 20,000 lb capacity. I have added a link below to our entire list of weld-on hitch options. Then for a 24 volt brake controller you'll need the Redarc Tow-Pro Elite Brake Controller...
  view full answer...
• Option For Heavy-Duty Hitch on Gulfstream Yellowstone
  There are no custom fit options for a hitch on your Gulfstream (I was unable to find any reference to a Reese 38535), but there are a couple of options for heavy-duty hitches you may be able to use, which are weld-on options. - Curt Class 5 Universal Weld-on Hitch w/ Brackets # C97CR - Curt Class 5 Universal Weld-on Hitch w/ Brackets # C59CR Both have a 20,000 lb towing capacity and 2,000 lb tongue weight capacity and will weld onto frames between 18" and 62" wide. The difference is...
  view full answer...
• Parts Needed to Tow 1999 Jeep Cherokee With School Bus
  We do have some hitch solutions for you, but they'll need to be welded in place in order to install them, as none of the universal fit hitches we offer can be bolted on. What you'll need to go with is a universal-fit hitch designed for a service body truck, and in order to choose the correct one, you'll need to measure the needed drop, which is the vertical distance between the underside of the frame member and the lowest point of the rear bumper. You'd then choose the hitch with a drop...
  view full answer...
• Highest Rated Hitch For A Camper
  I have included a link to the class III receivers designed for RV's and Campers like the Curt Adjustable Trailer Hitch Receiver Item # C13701. These are weld on or bolt on receivers and have a 500 lb tongue weight and 5000lb gross towing capacity. The highest rated hitch receivers we offer like the Curt Class 5 Universal Weld-on Hitch Item # C97CR are universal hitches and are not specifically designed for RV's and Campers, but require them to be welded to the frame. I have included a...
  view full answer...
• Recommended Universal Hitch for a 2021 Tiffin Allegro Red 340 38LL
  Yes, you are correct. You will want to go by the capacity of the lowest rated component to determine what your Tiffin Allegro Red has the ability to tow. We don't offer a custom hitch for your 2021 Tiffin Allegro Red 340 38LL, so you will need to use a weld-on universal hitch. I recommend the Curt Class 5 Universal Weld-on Hitch item # C37CR if the frame members are between 18" and 44" wide. If your frame is spaced wider, then you will want to use the Curt # C97CR which fits frame spreads...
  view full answer...
• Welding Tips For Trailer Accessories
  Be sure to weld in a ventilated area and of course use gloves and eye protection. Make sure that the area is clean of any paint or rust. You can clean the area with a wire brush, but I recommend getting a wire bit for your drill to really get the bare metal showing. If you're welding something to your trailer that will take a couple of different passes I would recommend jumping around to prevent warping of the accessory or the trailer metal itself. If you're stick welding be sure to get...
  view full answer...
• Trailer Hitch Recommendation for 2015 Tiffin Allegro Bus Motorhome
  We don't offer a custom hitch for your Allegro bus motorhome, so you'd need to use a weld-on universal hitch. I'd recommend the Curt # C37CR if the frame members are between 18 and 44 inches apart. If the frame spread is larger, use # C97CR which fits frame spreads up to 62 inches. Both hitches have a 2-1/2 inch receiver.
  view full answer...
• Can 2-1/2" Trailer Hitch Be Installed on a 2000 Alpine RV
  Thanks for reaching out! For your application I recommend checking out the Curt Class 5 Universal Weld-On Hitch which has a 2-1/2" hitch receiver, is rated for 20,000 lbs towing, and comes as part # C97CR for a 9" drop or part # C59CR for an 18" drop. Since these are universal you'll need to check the compatibility with your specific frame, but the crossmember measures 62" wide and can be cut to fit, and the weld-on installation means it can fit multiple applications. I'm attaching some...
  view full answer...
• Hitch Option For 1955 Kaiser Willys Wagon
  Hello Terran, While we don't have anything custom fit, there is an option, which is a universal weld-on hitch. Since your frame is more than 44 inches outside to outside, we have a pair of options depending on how much drop you need from the frame: - 11-1/2" Drop From Frame: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver # 15903 - 9" Drop From Frame: Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver # C97CR
  view full answer...
• Recommended Front Hitch for a 2020 Ford F-53/2021 Forest River Georgetown G7
  Hey Rick, we don't have any custom fit front mount hitch, but we do have universal hitches like the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C97CR which will fit frames that have a width of 18" to 62". This is a class V hitch that has a 2 1/2" receiver, a 20,000 lb weight capacity, and is assembled in the USA.
  view full answer...
• 10,000lb Hitch For A 2003 Trek Safari Motor Home
  Since there is not a custom fit hitch available for your 2003 Trek Safari Motor Home, a fabricated option is the only solution. I recommend the Curt Class 5 Universal Weld-on Hitch Item # C97CR. This is a universal hitch so it fits many different applications and has a 2000lb Tongue Weight and a 20,000lb Gross Towing capacity. Since we do not offer a universal class four hitch, here is a link to all of the universal hitches with the 10,000 weight capacity or above that you are looking for...
  view full answer...
• What Heavy-Duty Trailer Hitch For Trailer With 2,000 lbs of Tongue Weight
  Hi Jason, We have a couple of options for a trailer hitch with a 2,000 lb tongue weight capacity that you can have welded on. While there isn't anything specific for your '98 Minnie Winnie, you just need to measure your frame from outside to outside, as well as the amount of drop from the frame you need. Here are the options: Frame Up To 44 Inches Wide - 9 Inch Drop From Frame: Curt Class 5 Universal Weld-on Hitch # C37CR - 18 Inch Drop From Frame: Curt Class 5 Universal Weld-on Hitch...
  view full answer...