Will TruRyde Electric Trailer Brakes Fit 2014 KZ MXT 319
Updated 03/18/2026 | Published 03/12/2026 >
Question:
Is this the right fit for a 2014 KZ MXT 319 toyhauler camper?
asked by: Steve
Expert Reply:
Hey Steve! Do you know your axle size? It should be on the axle tag. It looks like your trailer uses 10" x 2-1/4" brakes but you need to verify that to be sure. Assuming that is correct, the TruRyde Electric Trailer Brakes # TRU36FR will work as a replacement for your 2014 KZ MXT 319 toy hauler.
If you aren't sure, feel free to send me a picture of your axle tag and I can verify this for you.

Tom
3/17/2026
We upgraded several trailers (3) in 2025. It really pays to have a mechanic talk to the person taking the order. It could be easy to just infer what you need. Listen carefully to each question that the representative ask. It helps to do the following.... * Have the trailer in front of you...taken apart with all grease removed *Watch the video about measuring from each lug nut so that you are measuring correctly *Have a good tape measure *Take your time, ask questions write everything down, label parts, use your phone to take pictures etc. We did 3 trailers with no returns. I also have a staff mechanic (part time) The sales representatives really care and are quite good.

Wayne B.
3/18/2026
I purchased these electric brake kits last year for my tow dolly. They were the perfect fit and were easy to install. I have had no issues with them and have been very pleased with how they work. Definitely gives me confidence when towing knowing my brakes are new and working.
Product Page this Question was Asked From
TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- TruRyde
more information >
Continue Researching
- Search Results: hub saver washer
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: Are The TruRyde Brake Assemblies TRU36FR Correct For A 2019 Cherokee Grey Wolf 26DBH
- Q&A: How to Tighten Self Adjusting Brake Assemblies by Hand
- Q&A: Is TruRyde Electric Trailer Brake Kit For 3,500 lb Axles Correct For 2017 Winnebago Minnie 2500RL
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: What Bearing Kit Fits a Lippert 4,400 lb Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Goodyear Endurance ST225/75R15 Trailer Tire with Silver Modular Wheel - 6 on 5-1/2
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Goodyear Wrangler LT225/75R16 Trailer Tire with Liger Aluminum Wheel - 6 on 5-1/2
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Parts Needed to Add Brakes to Ranger Boat Trailer
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Testing Trailer Brake Magnets for Proper Function



Pat
3/17/2026
Yes I bought and replaced the brakes on both axles of my trailer very simple to do though on my old brakes I had two bolts that were hard to get loose so rectified by soaking the other side in solvent which helped them come off easily . I cleaned the area with wire wheel installed the new brakes with new bolts reused the old hubs after they were cleaned brakes adjusted really nice trailer back in operation . Would purchase again when needed