Replacement Hub/Drum Assembly and Brakes for Dexter 10k Axle on Eager Beaver Deckover Trailer
Updated 02/10/2026 | Published 01/23/2026
Products Featured in This Question
Question:
Im looking for assistance finding the correct parts for this trailer. L Dexter 10Ks with 9-27 drums. 8x6.5 pattern. 4” pads. Outer bearing is a 387A. Id like to find hub/drum assembly with bearings and seals already pressed in. As well as assembled backing plates. or a correct kit with everything together. Trailer is a tandem axle, Dual tire. late 90s eager beaver deckover.
asked by: Garrett H
Expert Reply:
Hey Garrett! With a 387A outer bearing you may be able to use the # DX68QR you were looking at which uses the same 9-27 drum. Make sure the 387A was the outer, and not the inner bearing. Your inner bearing would be the 395S and then for the seal it is a 10-56 with an inner diameter of 3.125". I don't know of a pre-greased option with the bearings and seals installed for 10k hubs so this is the best we can offer.
For brake assemblies you can use the Dexter Nev-R-Adjust Electric Trailer Brakes # 23-438-439 or for hydraulic the Dexter Hydraulic Trailer Brakes - Duo Servo - Self-Adjusting # 23-404-405. Both are designed to fit a 12-1/4" x 4" drum like the 9-27.
What are you hauling next with the deckover?
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for Heavy-Duty 10K Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 395S / 387A
- Standard Grade
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- Dexter
more information >
Continue Researching
- Search Results: dexter trailer hubs and drums
- Search Results: dexter 21~36
- Search Results: dexter drum
- Search Results: dexter trailer bearings races seals caps
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 10K Axles - 8 on 6-1/2 - Oil Bath
- Shop: Steel Dual Wheel with Offset - 16" x 6" Rim - 8 on 6.5 - 4.75" Pilot - Silver
- Shop: Dexter Fortress Bolt-On Aluminum Oil Cap Kit - Fits 9K12K Axles - Black Coated - 6-Bolt Install
- Shop: Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Shop: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot - Silver
- Q&A: Are The Dexter Trailer Hub and Drum Assembly # DX68QR Sold as a Set Or Individual Quantity?
- Q&A: Solution for Needing Replacement Caliper for Kodiak 204 Caliper
- Q&A: How To Find Replacement Hub and Drum For Dexter Axle
- Q&A: How to Determine the Weight Capacity of a Dexter Hub and Axle
- Q&A: Replacement 12 Inch Brake Assemblies for Redline EB01-140 and EB01-145 From Dexter Axle
- Q&A: Is There a Replacement Hub For a AL-KO 7170 Trailer Hub?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Gooseneck to 5th Wheel Adapters
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Double-Eye Trailer Suspension System Review
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Robin H.
2/10/2026
Hey Garrett, how did things go with the Dexter hub and drum assembly for your Eager Beaver trailer? Did the 387A and 395S bearing combo end up matching your setup? Your update could make it easier for others working on similar heavy-duty axles.