Replacement 5 Amp/Hour Breakaway Battery For FM1250 5.0AH

Question

Question:

The backup battery on my trailer says FM1250 12v 5.0ah/20hr. Will any 12v backup battery work or do I need something specific? Thanks in advance

asked by: Chris P

0

Expert Reply:

You will want to replace your backup battery with another 1250 5 amp/hr battery. This will ensure you get the correct size to fit inside your battery case. We currently have the 3 options.

Hopkins # HM20008
Curt # C52023
Bright Way # 3801250

expert reply by: Bud M

0

Answer 1

Unfortunately, we cannot obtain the Amplock #AMP47FR keyed alike, but the similar Blaylock #BLDL-80 does have a keyed alike option. You can see a demonstration by using the provide link. Just choose 'keyed alike' from the drop down menu, and…

view full answer...

Answer 2

The mounting bracket holes can vary by manufacturer but 1" x 2-1/4" is super common. To install the T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer #37210525 you can reuse the 1" spaced holes and one set of the holes…

view full answer...

Answer 3

We've got the exact replacement breakaway system battery you're looking for. You'll need the Hopkins #HM20008. As you can see in the provided photo, the #HM20008 is a direct replacement.

view full answer...

Answer 4

Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load #C52027 has outside dimensions of 5" long x 3-3/4" wide x 3-3/8" tall and will fit the UB1250 style battery we carry which has dimensions of 3-1/2"…

view full answer...

Answer 5

When installing electric brake assemblies on just one axle of a tandem axle trailer, you will essentially want to choose the axle that is going to be seeing more weight. Typically on utility trailers, most of the weight will be in front of the axles…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 9

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 11

Hey Carter, thanks for reaching out! The GM trucks with the 6-1/2' bed can use a stationary hitch as long as the 5th wheel trailer has a tapered nose. For your 2025 GMC Sierra 2500 I recommend using the PullRite OEX SuperLite #PUL96ZR for a few…

view full answer...

Answer 12

Hi Bob; is your Patriot the slider #BWRVK3270 you looked at or the fixed #BWRVK3255? I know you said fixed mount hitch but since you looked at the slider I want to be sure. If it is the fixed hitch you can use the Adapter Rails for Curt 5th Wheel…

view full answer...

Replacement 5 Amp/Hour Breakaway Battery For FM1250 5.0AH

Product Page this Question was Asked From

Continue Researching