Castle Nut Torque Spec for 7,000 Pound Trailer Axle
Question:
what is the nut torque on a 7000 lb axle after packing the bearings?
asked by: Jerry H
0
Expert Reply:
There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle.
I have attached a video showing this process. If you jump to the 4:45 minute mark, you can see the procedure outlined above.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Grease Seals 10-36 (pair)
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Q&A: Electric Trailer Jack For Sundowner 3 Horse Trailer
- Search Results: dexter 010 036 00
- Shop: Replacement Trailer Brake Magnet for 12" Brake Assemblies
- Video: Replacement Trailer Brake Magnet for 12" Brake Assemblies Review
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Video: Hands-On with the Square Direct Weld Jack
- Search Results: 23~464~465
- Search Results: gooseneck jacks
- Search Results: 412920
- Search Results: 10~36 seal
- Video: Hands-On with the Replacement Magnet for Dexter 12-1/4" x 5" Electric Brake Assemblies
- Q&A: Troubleshooting Error Codes SH and OL on a Tekonsha Prodigy Brake Controller
- Q&A: Torque for 7,000 lb, 12 Inch x 2 Inch Dexter Electric Brakes
- Search Results: morryde x~factor crossmember
- Video: Comprehensive Review: Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies
- Shop: Brake Controller
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Video: Install: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension on a 2021 Subaru Ascent
- Q&A: Replacement Brake Assembly Magnets for a Dexter 8k Axle
- Video: Detailed Breakdown of the Trailer Hub and Drum Assembly
- Video: Mount: Dexter E-Z Flex Suspension Kit on a 2021 Grand Design Imagine Travel Trailer
- Q&A: Cushioned Equalizer Compatibility with Tandem 3,000 lb Axles
- Q&A: Replacement Suspension Parts & Lift For 2012 Skyline Koala 27CDS With 3,500 lb Axles
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
