Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-389-81UC3 Review

content loading



Customers compare 8-389-81UC3 to these similar products




Products Featured in this Video



Review of Dexter Axle Trailer Hubs and Drums 8-389-81UC3


Speaker 1: Today we're going to look at the Dexter never lube trailer hub and drum assembly for 8,000 lb Dexter 50 millimeter never lube axles with the eight on six and a half inch bolt pattern.This hub and drum assembly will include the 50 millimeter cartridge bearing, the bearing retainers to keep it in there, the grease cap, the wheel studs and you notice the lug nuts are also included. This is designed to work with both electric, let me turn it around for you. Both electric and hydraulic brakes. It is for use with the 12 and a quarter inch by three and three eighths inch brake assemblies. Application again is the 8,000 lb Dexter 50 millimeter never lube axles. Capacity on this one is 4,000 lbs.

So when this is used with one on the other side of the axle, it will meet the 8,000 lb capacity of the axle.The drum dimension we're going to measure here. Inside diameter is right at 12 and a quarter inches. Overall width is right at 4 inches. Again, the bolt pattern is an eight on six and a half inch bolt pattern. The grease cap that it comes with is a 3.355 inch outer diameter.

It fits right in there. The wheel stud size is nine sixteenths by eighteen. The lug nuts include eight of the nine sixteenths by eighteen lug nuts.That should do it for the review on the Dexter never lube trailer hub and drum assembly for 8,000 lb Dexter 50 millimeter never lube axles with the eight on six and a half inch bolt pattern.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.