Identifying Hardware Included with Curt 13322 Class III Trailer Hitch

Question

Question:

Wich are the m14 bolts and the 1/2 fastners?

asked by: Norberto C

0

Expert Reply:

The Curt # 13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts.

The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench.

I've provided a diagram showing the difference between the two types of bolts that shows precisely where they're installed. I've also linked to an installation video that you may find helpful.

expert reply by: Mike L

0

Identifying Hardware for Curt 13322 Class III Hitch
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 5

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 6

Hey John! Would you like to install the Draw-Tite Sportframe Trailer Hitch #24794 yourself if possible? You could use ramps like the Caliber Vehicle Ramp Kit #CA24AJ to get under there and install it. You would have them if you need them for any…

view full answer...

Answer 7

We no longer carry the Air Lift SmartAir II Automatic-Leveling Compressor System, however I have an alternative that I think works better and is less expensive. It is the Firestone Automatic, Single-Gauge Pneumatic Height-Control Valve w/ Compressor…

view full answer...

Answer 8

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

view full answer...

Answer 9

Hey Aaron, thanks for reaching out. You asked a good question so I double checked with my contact at firestone. It is a little confusing with the 2011 models since there apparently there were some leftover 2011 models that were branded as 2012s. To…

view full answer...

Answer 10

The factory hitch that came with your GMC Sierra 1500 was at least a Class III and possibly a class IV depending on what trim level you have. Looking at the available products as well as your specific application and towing needs, I recommend…

view full answer...

Answer 11

SumoSprings would definitely be the solution I would recommend for your squatting concern. The SumoSprings Solo Custom Helper Springs - Rear Axle item #SS45MR have a 2,800 lbs capacity which would eliminate that carolina lift look you get when your…

view full answer...

Answer 12

Yes, you can use a coupler pin or safety pin with the Demco Trailer Coupler #DM14040-81. A pin like the #37201211 will fit the 5/16" pin hole or you can use the etrailer Surge Brake Coupler Lock #e98888 if you want even more security.

view full answer...

Identifying Hardware Included with Curt 13322 Class III Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching