To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
For those who love a hassle-free setup, the Ultra Frame Trailer Hitch Receiver by Draw-Tite is a dream come true. Designed with a custom fit specifically for your vehicle, there's no need for welding. Its bolt-on installation makes it straightforward to attach, with all the necessary hardware and clear instructions included. The sturdy, square-tube design ensures a perfect fit during installation.
When you’re hauling heavy loads, strong and secure towing is paramount. With a massive 16,000 lbs of gross trailer weight capacity when used with weight distribution, this Class V hitch ensures your heavy-duty tasks are handled safely. Whether you're pulling a boat or a large trailer, this hitch stands strong and secure through it all.
When your adventures lead you through rough weather or off-road escapades, the hitch's black powder coat finish with an e-coat base is your best ally. This superior rust protection ensures your hitch remains durable and looking pristine mile after mile, regardless of the elements you face.
With a 1,600 lbs tongue weight capacity, the Ultra Frame Trailer Hitch Receiver provides a dependable and stable connection to your trailer. This ensures smooth, safe, and secure towing, crucial for maintaining control whether you're on a cross-country expedition or a local haul.
Confidence is key when towing, and this hitch provides peace of mind with its "Tested Tough" certification. Meeting and exceeding industry standards ensures safety and reliability, giving you trust in your hitch’s performance under heavy load conditions.
One size doesn’t fit all, especially in the world of towing. This hitch accommodates different installation heights with multiple settings, adapting easily to the frame width and specific vehicle needs. Whether you're installing on an F450 Cab or a custom setup, this versatility proves invaluable.
California residents: click here
Excellant heavy product. It took a little fitting to the frame, only because this went on a military truck. Finished project is neat and will haul well
Hitch is very well made. It is extremely Heavy Duty. Had to ream out all 6 mounting holes to allow use of 5/8" bolts. The side plates hang a little low. Hitch is mounted on a Jayco Seneca motorhome. It is much sturdier than OEM POS that came with it
This thing is super beafy. It's fairly easy to install. I had to drill all 6 holes. I installed this on a 2013 Ford F53 Winnebago 35B. Definitely worth the upgrade.
Joe 
3/6/2024
Still going strong a year later. Super happy with this hitch and purchase.
Yes working great on 1972 Chevy C20 tru ck.
Great product
Great product. Heavy duty. I had to drill 4 holes in frame. Looks good. 1987 Chevy V20 4wd 3/4 ton.
I git the part like you say I wood gate it on time I well tall to us you on part thank you and have a very nice day
Kj
8/29/2024
HI it have to work out great I user it a lot I am looking at the l track tiy down next hope by the next mouth
The hitch works great, but was not a simple install. None of the holes on the rails matched the frame on my chassis cab F350. I had to trim and make mods to this hitch to make it fit. Not what I expected at all. I am a metal fabricator by trade, so no big deal to me, but others wouldn't have the ability to install this hitch on the same truck as mine. The fit description needs to be reviewed and revised.
Mike L.
10/13/2018
Per the installation instructions, drilling is required to install this hitch on a 2011 Ford F350 Cab/Chassis, so the mounting holes in the hitch wont necessarily match up with existing holes in the trucks frame.
Great company, for sure!! Bought this to install on my recently acquired 1987 GMC crew cab dually, to be used as a moving and tow rig to trailer my cars south. Installation was straight forward, a bit of drilling and rivet removal, which I was prepared for. Took a bit of time, as you may guess, but I was definitely able to skip the gym today because of it. Loses one star for chipping paint on the side pieces, I'll need to paint to prevent corrosion. Also, one tab on the crossbar was bent, so I had to straighten it to ensure the bolts torque specs were true. I'm very confident it will be up to the task at hand.
I don't want to discourage anyone from buying this hitch. That said, I probably shouldn't go into great detail, as to how I use it. I replaced a class III hitch on my motorhome, to carry a 700 pound motorcycle on a carrier. It it designed to fit 36 inch frames, but simply reversing the brackets, it now fits a 42 inch motorhome frame. Nuff said. It does the job very well.
The hitch is doing every thing I need it to do. The one problem that I had with it was. I was told it would fit a F-350 2018. With the mounting we had to drop the fuel tank, to get at the rear bolts. Also we had to add a 1/4" plate to both ends of the hitch, evidently the 2017 frame is a half inch narrower then the 2018 model. Once we did that everything went together with out any problems.
Hitch came to me in good condition and looks very well built. However, I purchased this for a 1987 Chevrolet dually and it is not a fit for my truck. The first issue I found is with the spare tire. The side brackets are so deep there is no way to get around them to relocate the spare, they simply hang down too far. The hitch is at a good height in the uppermost holes. I attempted to install anyway only to find the center holes directly under a crossmember that would not allow space for a bolt to drop in. Overall looks to be a quality product for whatever its intended purpose just not workable on my square body dually. An expensive paperweight.
After years of comparison I bought this hitch for my US Army 1986 Chevy CUCV M1028 pickup. It had the right dimensions for simple mods to fit the truck, for which no commercial hitch will fit. We had to cut an L notch on both sides of the upright, to clear the shock mount. But there is plenty of steel there. By removing some of the bumper bracket, I was able to retain the bumper mount pieces, less 2.
Thank you fir the help we will let you know how it works
This hitch is being used on a custom 1969 Chevy C50 pickup truck. I won't be using this truck to haul, it's only for show. It was easy to install, and it looks perfect on the frame. You can't have a truck this big without a big hitch on it.
This receiver is well made and was not too bad to install. It should be noted that it is more of a "universal" hitch in that it fits multiple vehicles. This does require drilling holes in your truck's frame, which is not a difficult job, but it's not a direct bolt-on hitch. I had to make provisions for my true dual exhaust which added some time to the install, but overall it took about 3 hours to remove my rear bumper, the old class III hitch, and install this one. I use my 1986 GMC C3500 to tow my 24' enclosed car hauler.
The product is great; of high quality. The delivery was prompt. I will do business with etrailer.com again
David M.
1/14/2022
fantastic
Instructions say you need a 9/16 drill bit to drill the holes for the hitch. In all reality you need 11/16 inch to drill the holes in the frame to mount the hitch. I actually used a 3/4 drill bit to complete the install.
Ordered a Class V hitch, controller and wiring and actually received earlier than expected. Great customer service, had looked at one hitch which I thought would work and after talking to customer service purchased another recommend hitch which was best suited to my application.
Don't recommend.
It did not fit my truck as described, I have a 79 GMC pickup, and it left a 1"+ gap between the receiver and the frame on the most inside holes.
On top of that the box arrived all messed up, no hardware, the receiver is pretty strong, but was all scratched out.
I received the hitch as promised. I have not tried the installation as of today but I have no reason to say anything bad or good concerning the product. So should any more opinions be needed, send another request a week from today and I will answer and I will answer at that time.
Great quality arrived fast, drilled 6 holes in the frame and bolted it place excellent fitment good instructions will outlast most trucks it's put on twice as thick as the frame of my 2500 Chevy
Very heavy duty. Hardware kit was missing due to UPS. Called customer service and they shipped out a new hardware package right away. Great products and great customer service.
Great receiver, very strong and easy to install. Thanks for your quick shipping and great price.
Hitch fit very well and it installed very easy, will definitely buy another one from here when I need another. Thanks very much
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
12/2/2012
did you install this hitch on a m1008 cucv? if so did you need to cut one set of bumper brackets? trying to find a hitch that I dont have to hack up the stock cucv bumper brackets to install