Replacement 3500 Spindles for Lund Boat Trailer
Updated 03/25/2022 | Published 03/24/2022
Question:
The trailer 1998 for a 22ft lund I got hub kit 13511 for the axle but the spindle is in bad warn . I do not know how to remove the spindle or put a new one in. can you help? Don
asked by: Don M
Expert Reply:
If the spindle is damaged, it'll need to be replaced. The # CE13511 CE Smith hub is compatible with a 3500 lb axle that uses an L68149 inner/L44649 outer wheel bearing and a 10-19 grease seal.
For a spindle, you'll need a 3500 lb spindle, but the exact spindle needed will depend on your axle tube and how the current spindles are attached. I'll link to our 3500 lb spindles, but installing a trailer spindle is NOT a do-it-yourself job. Because the old spindle needs to be cut off and the new one welded on so it's perfectly square and concentric, you'll need an experienced welder who is familiar with trailer fabrication work.
You might find that it's simply less hassle or expense to replace the axle. We do offer a few of the most common axle sizes, do determine which one is needed, you'll need to measure the hub face to hub face distance and the distance between the centers of the spring seats as shown in the provided diagram.
I've linked to the 3500 lb axles we offer, if you can reply with the hub face and spring center dimensions of your existing axle, I'd be happy to check and see if any of the axles we offer would work for you.
(click to enlarge)
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Search Results: seal puller
- Search Results: bb1980a~ss
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Recommend Replacement Boat Trailer Hubs With Bearings L68149 And L44649
- Q&A: What are the Replacement Bearings and Seal for an E-Z Loader Trailer with ST205/75R14 Tires
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Dimensions of CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Q&A: How to Determine the Correct Replacement Hubs for a 1994 Bayliner Capri
- Q&A: Hub Replacement Recommendation for DICO Hub part 45264
- Q&A: How to Pick Out a Replacement Trailer Grease Seal
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Video: Complete Breakdown of the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Search Results: l68149
- Search Results: l44649
- Search Results: hub
- Search Results: trailer hubs and drums
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
on Trailer Hubs and Drums
