Recommend Replacement Boat Trailer Hubs With Bearings L68149 And L44649
Updated 04/16/2022 | Published 04/15/2022
Products Featured in This Question
Question:
Hello, I need to replace the hubs on my boat trailer, Trail Star single trailer, the bearings of the hub are L68149 and L44649 , 5 bolts , 14 tire size. Would you send me the part number of those hubs and which ones would you recommend for salt water use. Sincerely
asked by: Ventzislav A
Expert Reply:
We have something like the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized, part # AKIHUB-545-35-G-EZ-K. It is a marine grade 5 on 4-1/2 idler hub that comes with a grease cap. It comes with replacement bearings and seals. This is my recommendation for salt water use. The galvanization will protect the hubs from the salt water.
The CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased, part # CE13511, you attached to your question may also work.
I have included a product description link, a video review, and a video of the Easy Grease hub being installed below.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Could CE Smith 3,500 lb Trailer Hub Fit 2001 EZ Loader
- Search Results: boat flags
- Search Results: trailer hubs and drums
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Search Results: spare hub
- Search Results: hub
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Search Results: spindle wear sleeve
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Search Results: seal puller
- Search Results: bb1980a~ss
- Shop: Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: Filling Hub With Grease That Has a Grease Zerk Outside The Hub
- Q&A: Bearing Buddy Bearing Protectors For a Hub With 1.97" Bore
- Q&A: Need a Grease Seal With Inner Diameter of 1.845 Inches and Outer Diameter of 2.442 Inches
- Q&A: Determining Which Idler Hub Assemblies Will Replace Hub and Drum Assemblies On 19' Boat Trailer
- Q&A: Replacement Idler Hubs For ShoreLand'r Boat Trailer YAV46TABLW
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
on Trailer Hubs and Drums
