Hub Replacement Recommendation for DICO Hub part 45264

Updated 02/09/2021 | Published 03/26/2018

Products Featured in This Question

CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(319)

$66.65

Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1

(204)

$20.42

Question:

Hello, I have a DICO hubs 45264 on my pontoon trailer. Would the CE13511 pre-marine greased hub be a replacement? Thanks

asked by: Tim H

Helpful Expert Reply:

Yes, the CE Smith Trailer Hub part # CE13511 will fit as a replacement for your DICO hub 45264 but you will need to use a different seal as we have found that your spindle diameter is slightly different which means you need the # 168255TB as well.

expert reply by: Jameson C

Brandon M.

1/19/2020

I have a 2 freedom axles on my car trailer. They appear from my measurements to be 5x5 on bolt pattern. 45264 is the number on the back of hub along with another number BB1. Was wondering if anyone could shed some light on what the bolt pattern would be and what brake kit would be a direct bolt on electric kit for my trailer now?

Jason S.

1/20/2020

The hubs you have for 3,500 lb axles. The electric hubs you need are the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. These assemblies after initial setup will adjust as needed to ensure the brakes work at full capacity. I've attached a printable bolt hole pattern template for you to determine the pattern of your hubs.

Helpful Links

faq-Adding-Electric-Drum-Brakes.aspx

faq-bolt-hole-pattern-template.aspx

faq-wheel-bolt-pattern.aspx

tv-review-etrailer-electric-brake-kit-akebrk-35-sa.aspx

Michael M.

5/5/2020

I have a dico 45264 which is a 4.25 5 lug. Is this correct?

Chris R.

5/7/2020

Yes, the CE Smith # CE13511 that Jameson mentioned above will work well. As noted though you will need to replace its seal with part # 168255TB.

Kim W.

2/8/2021

@ChrisR michael asked if his dico 45264 was a 4.25 and your answered yes, but I click on the replacement e13511, and it's a 4.5.

Jon G.

2/9/2021

@KimW I think that MichaelM may have meant 5 on 4-1/2" (or he possibly measured to the inner edges of the bolts) because when I researched the Dico 45264 it has a 5 on 4-1/2" bolt pattern.

Debbie

7/18/2020

We have an older Hoosier Pontoon Trailer which I've been told has a Dico hub on it originally but haven't found a number anywhere on it. It how ever uses 2 different bearing sizes for inner-L68149 outer-LM11949 have been told this is no longer avail to replace and will need new axle. Do you by chance have one to replace or is this in fact the case. Thank you

Chris R.

7/22/2020

I wish I had better news for you but it does look like that particular hub size is obsolete - we don't have anything that will fit your existing spindles. Your best option likely is indeed a full replacement axle that feature more standard/current spindle dimensions.

Helpful Links

dept-pg-trailer_axles.aspx