What Size Hitch Ball Does 2020 Keystone Bullet 291RLS Use

Question

Question:

I have a 2020 keystone bullet 291rls with blue ox sway pro. What size hitch ball do I need. Im not able to see it on the coupler because its not stamped very well.

asked by: James S

0

Expert Reply:

According to what I was able to find your 2020 Keystone Bullet 291RLS has a coupler designed for a 2-5/16 inch hitch ball so for hitch ball that works with your WD system and is right size you'd want the part # 63847.

expert reply by: Jameson C

0

Answer 1

I'm happy to help you get what you need for towing. I did a little research to find your 2017 Toyota Highlander SLE AWD towing capacity to be 5,000 lbs. Based on that, you will not have an issue with a 3,850 lb travel trailer with 400 lb tongue…

view full answer...

Answer 2

You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…

view full answer...

Answer 3

The TorkLift Cannon Hitch Extension #TLE1636 is specifically designed to fit your 3" Ford receiver. This will extend your receiver 36" and reduces it to a 2-1/2" receiver with an included reducer to a 2" receiver as well. It can…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Hey Zach, to convert the 4-way of your 2017 Toyota Highlander to a 7-way and install a brake controller requires the adapter part #ETBC7. This comes with everything needed to make the conversion as well as wire in a brake controller. If your current…

view full answer...

Answer 7

Hey Greg! To add a 7-way connector to your 2017 Highlander, you'll need the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your…

view full answer...

Answer 8

The custom trailer wiring harness for your 2018 Toyota Highlander with the tow package is part #HM11141825; however, it's only a 4-way connector. To get a 7-way on your Highlander start with the #HM11141825 4-way and then use our #ETBC7 kit to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Hello Brandon, Congrats on the new camper! When picking out the right weight distribution hitch it is most important to be as close to the tongue weight as possible. You said that your tongue weight is around 700 pounds, I am not sure if you are…

view full answer...

Answer 11

Hey Sal, I have just what you are looking for with the Reese Pro Bar part #RE34FR. This is a much lower cost option for a weight distribution system that will work great for you. It has sway control built into the system as well. Would this fit your…

view full answer...

What Size Hitch Ball Does 2020 Keystone Bullet 291RLS Use

Product Page this Question was Asked From

Continue Researching