Correct Replacement for TDE 46210 Trailer Hub

Question

Question:

I dont see a number on the spindle. It looks like the #85. Should it be stamped somewhere?

asked by: Tim M

0

Expert Reply:

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500 lb axle so you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for galvanized or part # AKIHUB-545-35-K for standard.

expert reply by: Conner L

0

Frank

3/13/2025

incorrect information the standard 5 on 4.5 hub for a 84 spindle will not replace this hub when brakes are in the equation.. FYI

Jameson C.

3/13/2025

@Frank Because of the lack of a drum?

Answer 1

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

view full answer...

Answer 2

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

view full answer...

Answer 3

Hey Eddie, thanks for the pictures. From seeing that I can tell you have a 3,500 lb axle and the correct replacement hub would be the part #AKIHUB-545-35-G-EZ-K that you referenced which comes with new bearings and seal.

view full answer...

Answer 4

Your 2020 Nitro Z20 has an average weight of 4,000lbs. For that weight I recommend using the 6,000lb Dexter E-Z Flex Suspension Kit #K71-652-00. You will want to verify this with the spacing or your current equalizer. This kit is designed to replace…

view full answer...

Answer 5

To make sure you find the right replacement hubs you can do a couple of things. First check out the bearing and see if you can find the numbers for the bearings either etched or stamped on the side of the bearing. If you can not find the numbers you…

view full answer...

Answer 6

I recommend the Jensen RV Stereo part #JWM60A to replace the LS6050DVD Magnadyn Liner series model in your RV. The Jensen brand is very reliable and has the same size cut out as the Linear series. It does feature am/fm and dvd/cd. It does not have a…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the #PTW80157. It looks like one bearing is stamped with…

view full answer...

Answer 9

According to my research your TDE 46845 trailer hub fits a #84 spindle so the replacement bearing and seal kit you need is part #BK2-100. This is for a single hub so you'll need to adjust the quantity as needed. Attached is a video showing this…

view full answer...

Answer 10

The Dexter Trailer Idler Hub Assembly for 3,500-lb Axles item #84545UC1-EZ fits a item #L68149 bearing which has a 1.378" inner diameter. I would not recommend using this hub on a boat trailer. Instead, you'll want a galvanized one like item…

view full answer...

Answer 11

Hey Glynn, for your Dexter 8-285 trailer hub the wheel stud you'd need is the part #7-223.

view full answer...

Answer 12

The Trailer Idler Hub Assembly part #AKIHUB-545-35-G-K or part #AKIHUB-545-35-G-EZ-K for easy grease will be a direct replacement for the TDE 46210. That said, you may also need the Double Lip Seal part #168255TB since that hub can use two different…

view full answer...

Correct Replacement for TDE 46210 Trailer Hub

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching