Does Equal-I-Zer Weight Distribution Shank Work with Recurve R3 System

Question

Question:

Will this shank work with a Recurve R3 weight distribution hitch?

asked by: Jesse D

0

Expert Reply:

The Recurve R3 weight distribution is designed for standard weight distribution shanks like what the Equal-i-zer part # EQ90-02-4500 is designed to work with so it would work great for you.

expert reply by: Jameson C

0

Answer 1

Hey Martin, it's great to hear from you again! If I were in your shoes I'd go with the Eaz-Lift ReCurve R3 rated for 1,000 lbs of tongue weight so you're able to still load a few things up in your truck bed (behind your rear axle) and not…

view full answer...

Answer 2

Hey Jesse, thanks for reaching out! The BulletProof Hitches Weight Distribution Shank #BPH75RR will fit just fine with your Eaz-Lift ReCurve R3. We haven't test fit this, but they both use the industry standard shank size which is why I'm…

view full answer...

Answer 3

We can get your 2022 Forest River R-Pod RP-193 set up with a weight distribution hitch with sway control, and while we don't offer the Recurve, we do have an option that is better, from Fastway: - Fastway e2 Weight Distribution w/ 2-Point Sway…

view full answer...

Answer 4

I recommend the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM82MR for your 2022 Forest River Grey Wolf 24JS black label. This kit is specifically designed to work with your 3,500lb axles and will replace your double eye…

view full answer...

Answer 5

The sales person is partially right because they sold you a system that has a maximum tongue weight of 1,000lbs, and, what you need is a weight distribution system like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37140ET…

view full answer...

Answer 6

If you choose a hitch that is too light for your application it will not be effective. If you choose a hitch that is too heavy, you'll suffer a rigid ride and a bouncy trailer. Ideally you want a system that has a tongue weight capacity where…

view full answer...

Answer 7

The Blue Ox 2-Point Weight Distribution System part #BLU82XR is an excellent cost effective, entry level weight distribution system with sway control properties. It has a 600-800 lb tongue weight rating and it comes with the hitch ball already…

view full answer...

Answer 8

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. Since your…

view full answer...

Answer 9

I recommend using the Roadmaster Quiet Hitch #RM-061 to remove the rattle and stabilize your ReCurve R6 weight distribution hitch. This is made in the USA with a zinc finish to help prevent corrosion better than the vinyl coated Stabilizer #e99007…

view full answer...

Answer 10

If you go with a weight distribution system that is rated too high for the trailer being towed you'll end up with a really harsh ride quality. So based on knowing your tongue weight will be between 600 and 800 lbs the best Fastway weight…

view full answer...

Answer 11

The Reese Strait Line systems like the part #RP66130 that you referenced has the best sway control over any other WD system including the Camco you have. It's the only one that works to fight sway before it starts. You will see a reduction in…

view full answer...

Answer 12

Thanks for all of the information! It sounds like you are looking to replace just the spring bars on your weight distribution hitch. That is possible, and I would go with the 800lb bars as they will not be too stiff with 600lb tongue weight. If you…

view full answer...

Does Equal-I-Zer Weight Distribution Shank Work with Recurve R3 System

Product Page this Question was Asked From

Continue Researching