Will BulletProof Hitches Weight Distribution Shank Work with a Eaz-Lift ReCurve R3
Updated 12/22/2025 | Published 10/03/2024
Question:
Looking at the shank measurements on this and the head measurements on my eaz-lift recurve r3, it looks like it would work. Can anyone confirm?
asked by: Jesse
Expert Reply:
Hey Jesse, thanks for reaching out!
The BulletProof Hitches Weight Distribution Shank # BPH75RR will fit just fine with your Eaz-Lift ReCurve R3. We haven't test fit this, but they both use the industry standard shank size which is why I'm saying they'll fit together.
Just to give you some peace of mind, the part of the BulletProof shank that connects to the hitch head is 2" square, and has the mounting holes spaced 1-1/4" apart.
Attached is a dimensions photo for you to referenced as well.
(click to enlarge)
Product Page this Question was Asked From
BulletProof Hitches Weight Distribution Shank for 2-1/2" Hitches - 8" Long - 9 Hole Adjust
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 2900 lbs TW
- Fits 2-1/2 Inch Hitch
- BulletProof Hitches
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Comparing Hole Spacing On Weight Distribution Shanks from Curt C17122 and Equalizer EQ90-02-4600
- Shop: Triangle ST235/85R16 Heavy-Duty Radial Tire - Load Range G
- Search Results: trailer leaf springs
- Search Results: smart plug
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: BulletProof Hitches Weight Distribution Shank for 3" Hitches - 8" Long - 9 Hole Adjustment
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 10" Rise, 6" Drop
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Will Spring Bars Rated Above Trailer Tongue Weight Make for a Stiff Ride
- Video: All About the BulletProof Hitches Weight Distribution Shank for 3" Hitches
- Video: The Low-Down on the Gen-Y Hitch Anti-Rattle Reducer Sleeve
- Video: Review of the Gen-Y Anti-Rattle Clamp for 3" Hitch Receivers
- Q&A: Recommended Paint For Touching Up Blemishes On A Trailer Hitch Accessory
- Search Results: weight distribution hitch
- Shop: BulletProof Hitches Weight Distribution Shank for 2" Hitches - 8" Long - 7 Hole Adjustment
- Shop: 2-5/16" Hitch Ball w/ 2" Rise - 1-1/4" Diameter x 2-5/8" Long Shank - Raw - 25K
- Q&A: Is There Reese Weight Distribution Shank that Fits 2-1/2 inch Hitch Size
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: rubber lube plug
- Search Results: hitch adapters
- Search Results: reese strait line hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Adding Rise to a Reese Round Bar Weight Distribution Hitch
- Q&A: Dimensions Of Curt 2-5/16 Inch Hitch Ball With 2 Inch Rise
- Q&A: Does Hitch Ball Angle Need Adjusting For Equal-i-zer Weight Distribution
- Video: Review of the Replacement Mounting Bolt with Nut for Adjustable Channel Couplers
- Video: Breaking Down the Pro Series Mounting Bolts for Adjustable-Channel Couplers
Robin H.
12/22/2025
Hey Jesse, how did the fit turn out with the BulletProof weight distribution shank and your Eaz-Lift ReCurve R3? It’d be great to know if the standard shank size worked as expected. Your update could make it easier for others checking compatibility between these setups.