Replacement Coupler for Vintage 1958 Boat Trailer

Question

Question:

I am trying to repair an old boat trailer that needs a new coupler. Id prefer a bolt on solution since moving the trailer to a shop to have some welding done is difficult. Ive attached some pictures that may help. Suggestions?

asked by: Charles

0

Expert Reply:

That is an extremely unique trailer setup that would require a channel style of coupler like the part # PSA200S0303 with the bracket part # BDAC3000300 which would get welded to the front of it.

expert reply by: Jameson C

0

Customer Picture
(click to enlarge)

Answer 1

That is correct the inner dimension of the Demco A-Frame Trailer Coupler item #DM14793-95 is 10 3/4 inches. I have attached a picture that breaks down the measurements. You would need to fabricate a spacer on either side to attach this coupler to…

view full answer...

Answer 2

To replace the Atwood 88555 coupler, I recommend Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch part #BD43805W0317 which is a weld-on option rated for 8,000 lbs and takes a 2" ball.

view full answer...

Answer 3

I checked the Featherlite Trailer website for specs on the model 3116 trailer but this part number returned no results. But if your trailer uses an industry-standard 50-degree a-frame design then the Demco A-Frame Trailer Coupler #DM16680-52 will fit…

view full answer...

Answer 4

Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree…

view full answer...

Answer 5

Yes, the Demco A-Frame Trailer Coupler #DM14793-52 that you referenced could have holes drilled to match what you have on your trailer. This coupler would be a great option to replace a Ram brand coupler. I attached a picture that shows how the…

view full answer...

Answer 6

The Demco A-Frame Trailer Coupler #DM14793-95 is designed for standard A-frame trailers which is 50 degrees as you mentioned. I confirmed this with my contact at Demco. This is a 10,000-lb coupler and it is designed for a 2-inch hitch ball.

view full answer...

Answer 7

I do have a jack for you but the etrailer Item #TJBB-2001-B you were looking at does not have the option to add a wheel. Instead you will want the Pro Series Snap-Ring Swivel Marine Jack item #PSEJ10000101. This jack is similar to the Fulton…

view full answer...

Replacement Coupler for Vintage 1958 Boat Trailer

Product Page this Question was Asked From

Continue Researching