Stabilizer Jacks for Pop-Up Camper

Question

Question:

Hello, I have a 94 Coleman popup that I need 2 stabilizer jacks to replace the damaged factory jacks with. I tried purchasing some scissor jacks but could not make the mounting bracket work effectively. Any ideas on what to do?

asked by: John P

0

Expert Reply:

We have some stabilizer jacks, but don't have a way of knowing what type of mounting or bracket is used on a 1994 Coleman pop-up camper. For jacks with a simple mounting hole dimension of 3 inches apart on center you can use the Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" # TJ01RT-HD or Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" # 288-01892-2.

Both jacks have a support capacity of 1,000 lbs and can be bolted on. The other option is another scissor jack, the Scissor Stabilizer Jack - 18-3/4" Travel # TJSC-24, which has four bolt holes that are spread apart 1 inch on center both vertically and horizontally. If you go to the product page you can see the mounting bracket which should help you determine if the jack will work for you.

I have also added links below to video reviews for you to take a look at.

expert reply by: Kyle S

0

Answer 1

The Stabilizer Jacks #TJ01RT-HD you were looking at are what I would recommend for your cargo trailer. These are simple but effective and at a great price. The support capacity per jack is 1,000 lbs which will be fine for your trailer since they…

view full answer...

Answer 2

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 3

Hey Josh, the dimension for both jacks that you are looking for is the bracket height. This is the distance from the center of the jack's mounting bracket down to the ground when extended/retracted. On the shorter part #e34RV the bracket height…

view full answer...

Answer 4

I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long, 4-3/8"…

view full answer...

Answer 5

Hey Ken, the Replacement TPMS Grayscale Display Monitor for TST 507 Series #TST97FR is not backlit for better brightness. The idea behind this version was to be easier to read in direct sunlight so a backlight wasn't planned. They do also have…

view full answer...

Answer 6

Hello Karl, thanks for reaching out. The Patriot Hitches Square Trailer Jack #PH66NR does not come with mounting bolts. You will need to source those locally.

view full answer...

Answer 7

A example of a conventional steel trailer wheel is Dexstar #AM20766. Modular wheels are simply trailer wheels that feature cosmetically-appealing holes rather than spokes or a solid inner surface. A good example of a modular trailer wheel would be…

view full answer...

Answer 8

To install the Stabilizer Jacks - 6-1/4" Drop Leg Travel #TJ01RT-HD you'll need to get 7/16" mounting hardware. In the attached review/installation video we use #14 self-tapping screws to mount these jacks into the frame of the trailer.…

view full answer...

Answer 9

Yes, a Timbren Axle Less kit like part #A20RS440 would work well on your pop up camper trailer. These are similar to torsion style axles which are commonly found on pop ups like yours. This specific kit is a 2,000 lb axle with hubs that have a 4 on 4…

view full answer...

Stabilizer Jacks for Pop-Up Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching