Tie Downs for Scooter on Cargo Carrier

Question

Question:

The 60 X 24 cargo carrier seems like a good fit. I need to transport an e-scooter two front wheels and one rear that measures 70L X 28.7W X 40.6H. Wheels are 16 inch diameter include tires, and wheels are at the outer length both in front and back, so it looks like the vehicle will fit inside the carrier. The 28.7 inch includes the handle bars whereas the tires will fit inside the 24 inch width. Assuming you agree this carrier seems appropriate, I'm concerned about best way to tie this down. Two thirds of the scooter is no more than 30-32 inch high with the 40.6 inch where the handlebars/rear view mirrors are. Any suggestions? Thanks. Photo attached.

asked by: Mike L

0

Expert Reply:

Your photo did not come through, but if you are sure your scooter will fit inside the 24x60 Curt Cargo Carrier for 2" Hitches # C18152, I do have a suggestion for tie-downs. What I recommend are motorcycle tie-downs, as these will work with your scooter as well, the ShockStrap Ratchet Motorcycle Tie-Downs with Shock Absorbers # 297-7RSBB-M.

This is a quantity of four straps and they are shock-absorbing to keep your scooter steady with constant tension so the straps won't come loose. I have added a link to a video review showing these tie-downs in action.

Also, to secure the cargo carrier to your hitch you will need the Trailer Hitch Receiver Lock # e98880.

I have added links below to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Before you purchase anything you should verify with the hitch and RV manufacturer that they are both rated high enough for the weight of the carrier, scooter, and boat. One option is a motorcycle carrier. The Ultra-Fab Carrier #UF48-979033 is also…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hello Tyler, thanks for reaching out. The T-One Vehicle Wiring Harness #118784 is not recommended for the 2025 Hyundai Santa Cruz. When this harness first came out, the manufacturer stated it would work with all models of the 2025 Santa Cruz. We…

view full answer...

Answer 4

Hey Corey, thanks for reaching out. We do have the 145/80-12 tires available, but our will be a load range D or E, so a thicker ply than the Carlisle C range tires you have now. We do not have any C range options, but the D or E range can certainly…

view full answer...

Answer 5

The #DR47FR does not fit the hybrid or PHEV models. It fits all other models excluding these two. This means the Draw-Tite hitch will not fit your 2020 Ford Escape Hybrid. However, the etrailer Trailer Hitch Receiver #e89YR is confirmed to fit the…

view full answer...

Answer 6

To add a 7-way connector to your 2020 Ford Escape you have to have a 4-way connector like item #C75CR already installed. There are no custom fit 7-way harnesses for your Escape so you will need to use the Universal Installation Kit for Trailer Brake…

view full answer...

Answer 7

Hey Cheyenne! What size is your truck bed? If you have the 8' bed then the Air Lift #AL88211 is the correct part. If you have a shorter bed you need the #AL88204 instead. These will work with your lift kit and help level your suspension. The nice…

view full answer...

Answer 8

I did some checking and yes your 2020 Ford Escape Hybrid AWD can be flat towed. You will need a baseplate, safety cables, wiring, tow bar, supplemental braking system and possibly a high low adapter. I have made a list of recommendations below.…

view full answer...

Tie Downs for Scooter on Cargo Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching