Replacement Grease Seal for GS-1250DL

Published 03/28/2020

Products Featured in This Question

Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles

(3174)

$17.16

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(614)

$5.21

4" Carbon Fiber Digital Caliper

(24)

$12.72

Double Lip Grease Seals (pair)

(614)

$6.95

Question:

got a grease seal with the following part number. TRP GS-1250 DL . what do you have that i can use to replace it? tape measurement says 1.25 ID and 2.0 OD.

asked by: Craig

Expert Reply:

I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements:
Inside Diameter: 1.249"
Outside Diameter: 1.983"

It should also be noted that using a tape measure is not an accurate way of measuring any components like bearings, races and grease seals. In the future you'll want to use a digital caliper like the # PTW80157 to get a measurement that will give you accuracy down to the thousandth decimal place.

The TruRyde grease seal # 34823 is a double lip seal that has an inner diameter of 1.249" and outer diameter of 1.983" and will be a direct replacement for the GS-1250 DL that you found in your hubs. These can also be purchased in a pair with part # RG06-010.

expert reply by: Erik B