Troubleshooting Flashing Letter P on Variable Speed Controller for SaltDogg Salt Spreader

Question

Question:

On the salt dogg controller what does a flashing letter P mean?

asked by: Ritchie

0

Expert Reply:

If you're getting a flashing letter P on the Replacement Variable Speed Controller for SaltDogg Salt Spreader # BP54FR, it indicates a spinner motor overload. To resolve this, inspect and clear the spinner disc as outlined in the troubleshooting chart attached.

I've attached the complete installation instructions for you at the bottom of the page as well.

expert reply by: Carla M

0

click to enlarge

Answer 1

The "P" code on your Replacement Variable Speed Controller for SaltDogg Salt Spreader part #BP54FR is the code for the spinner motor being disconnected. They recommend inspecting the wire harness/motor for damage and then reconnecting and…

view full answer...

Answer 2

I spoke to Buyers about the issue you're having with your SaltDogg Salt Spreader and they informed me that you will want to apply power directly to both the spinner and auger to ensure they are working correctly. The systems all feed back into…

view full answer...

Answer 3

According to the attached Troubleshooting Chart, the letter L displayed on the SaltDogg Controller #BP54FR indicates low voltage (less than 10V for more than 10 seconds) applied to the system. This will cause the controller to shut off automatically.…

view full answer...

Answer 4

The problem you're seeing with the SaltDogg Electric Tailgate Salt Spreader #337TGS03 sounds like it's either with the controller or with the harness. Try testing the harness by applying power to make the motor spin. If the problem still…

view full answer...

Answer 5

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it meets.…

view full answer...

Answer 6

The blinking J on the Controller for SaltDogg Salt Spreader #BP54FR indicates the spinner motor is jammed. You will need to turn the controller off and clear the jam.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Troubleshooting Flashing Letter P on Variable Speed Controller for SaltDogg Salt Spreader

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching