How Far do Trailer Springs Typically Compress
Published 03/22/2019
Question:
I have a tandem axle trailer that Im installing new axles on. 7000lb axles. It is a deck over trailer. I had the axles mounted under the springs on the old axles to gain clearance from for the tires to the deck. On part number e64SR. How much will these springs compress and how much clearance is needed from the top of the tire to the deck. 235/80/16. Thanks in advance
asked by: Tim C
Helpful Expert Reply:
Typical spring deflection for trailer leaf springs like the part # e64SR is right at 1-1/2 inches when at capacity. Generally speaking you will want to have 3 inches from the top of your tire to a fender on a trailer (in your case a deck) to accommodate for suspension travel.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: 185 75 13
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Shop: Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Shop: Swagman Ramp and Bridge for Swagman Current, E-Spec, and G10 Bike Racks
- Search Results: tire pressure monitor system
- Search Results: hitch extender
- Search Results: tpms
- Search Results: e~spec
- Video: Let’s Check Out the Roadmaster Anti-Rattle Hitch Extender for Tow Bars
- Video: The Low-Down on the RockyMounts Hitch Extender LS w/ Hitch Pin and Lock
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: s94fr
- Search Results: trailer tires and wheels
- Video: Comprehensive Review: Demco Hydraulic Brake Kit
- Video: In-Depth Review of the Trailer Hub and Drum Assembly
- Video: Complete Breakdown of the Clip for Dexter Steel Brake Line Tubing
- Video: All About the LED Trailer Fender Light w/ Mounting Bracket
- Video: Complete Breakdown of the Identification Light Bar for Trailers over 80" Wide
- Article: Trailer Lighting Requirements
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Q&A: What Causes Trailer Leaf Springs To Break Continuously
- Q&A: Does The Amount Of Leaves On A Trailer Leaf Spring Matter?
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Q&A: How Much Should a Leaf Spring Bend and How Much Distance Should Be Between Axle and Trailer
- Q&A: Comparing Uni-Servo and Free Backing Hydraulic Drum Trailer Brakes
on Trailer Suspension Parts
