Replacement Hub Recommendation for Tracker Boat Trailer with Spindles that Measure 1.05 inch
Question:
I am wanting to replace hub assembly on a tracker boat trailer that I recently bought. Pulled the hub off and having trouble seeing a number on the bearing. Looks like 649 on the last 3 numbers, but it is pitted bad. I have a number off of the race, it is L44010. The trailer has a straight spline and when I put the mic on the spline, it reads 1.05 . The inside diameter reads 1.05 when measured. Is it safe to say 1 inch ? Really need to find the right fit can you help me? Thanks
asked by: Tim B
Expert Reply:
From the info you gave me (good job by the way!) the correct hub you need is the part # AKIHUB-545-2-1K. This hub fits the BTR spindle you have which matches the dimensions you listed and uses the bearing part numbers L44649 which matches the partial number you listed.

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Locating Replacement Hubs for 2011 Forest River R-Pod 172 with E-Z Lube Axle
- Q&A: Factors to Consider When Selecting Replacement Idler Hub for Bass Tracker Trailer
- Search Results: brkh10bs
- Search Results: akebrk~35~sa
- Search Results: spindle cotter pin
- Search Results: grease
- Search Results: cotter pin
- Search Results: marine grease
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Spindle Nut 1"
- Video: Hydraulic Brake Kit Review
- Video: Complete Breakdown of the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles
- Video: etrailer Hydraulic Trailer Brake Installation
- Shop: Hydraulic Brakes - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right - 3.5K - 10 Pairs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: l88149
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: How Far Does the Dexter Hub # 84556UC3 Center Bore Extend From the Mounting Face of Hub?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Solution for 8" Replacement Wheels With 4 x 3.75 Bolt Pattern
- Article: Trailer Wiring Diagrams