Lug Nuts for AM3H390
Updated 09/26/2025 | Published 04/25/2025
Products Featured in This Question
Question:
I have just gotten a AM3H390 tire and wheel combo. I put it on my trailer and the lug nut does not seat into the wheel. do you have spec on this wheel so I can get the right nuts. The trailer is a 1997 Continental snowmobile trailer. Thank You,
asked by: James G
Expert Reply:
Hi James!
The wheel part # AM3H390 uses a 1/2"-20 lug nut with a 60-degree cone seat. If your current lug nuts aren’t fitting right, it’s likely because they’re not the right style. I recommend using the 1/2"-20 cone lug nuts, part # AM90049. These will fit your wheel properly and seat the way they’re supposed to.
Man, snowmobiling sounds awesome! Where do you like to go to snow mobile?
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Search Results: trailer tires and wheels
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: Depth of Hub Bore on Dexter Trailer Idler Hub Assembly # 8-258-50UC1
- Q&A: Replacement Idler Hub For a 2017 Triton LTWCI-T Boat Trailer With 2,000LB Trailer Axle and Knott Hub
- Shop: Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Search Results: galvanized boat trailer axle
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Video: In-Depth Review of the Bearing Kit for Trailer Brakes with 8" Hub/Rotor
- Video: What to Know About the Trailer Hub Assembly
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 1-1/16 Inch BTR Spindle - DX59UR
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Video: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles Review
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle
- Search Results: 10 inch trailer tires and wheels
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM3H453
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Benefits of Changing Trailer Tires to Higher Load Range
- Q&A: If Trailer Manufacturer Recommends Load Range C Tires Can Load Range E Tires Be Added to Trailer
- Q&A: Best Replacement for 20.5x8.0-10 Trailer Tires
- Q&A: Recommended Spare Tire Cover for 205/65-10 Tire
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
on Trailer Tires and Wheels
Heather A.
9/26/2025
Hi James, Did the 1/2-20 cone lug nuts work for your wheel on the snowmobile trailer? I'm asking because your experience could help others who might face a similar issue.