Brake Drum for a Reliable 2,700 Pound Trailer Axle
Products Featured in This Question
Question:
What brake drum would fit a reliable 2700# axle ? Part # 2700-064 , Want to use ten inch tires
asked by: Brian P
Expert Reply:
If the spindles on your Reliable 2,700 pound axle are straight (same diameter in both bearing locations) then that indicates that it uses L44649 inner and outer bearings but if the spindles are tapered (inner bearing surface diameter is larger than the outer bearing surface diameter) then it will use L68111 for the inner bearing and L44649 for the outer.
If you pull a hub off and find that both bearings are L44649 you can use # AKHD-545-2-EZ-2K if there are grease fittings at the ends of your spindles and the wheels have a 5 on 4-1/2 bolt pattern. If the spindles do not have grease fittings but you have a 5 on 4-1/2 bolt pattern then you can use # AKHD-545-2-2K.
If you have the 4 on 4 bolt pattern with grease fittings use # 8-173-16UC3-EZ. And for the 4 on 4 without grease fittings use # 8-173-16UC3.
If the inner bearing is L68111 we won't have a hub for it. The key is to look at the bearing numbers stamped into the sides of the bearings. That will ensure that we can select the right parts for you.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Grease Seals (pair)
- Q&A: Correct Replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes
- Q&A: Replacement Grease Seal For 15192TC Grease Seal On Older Utility Trailer
- Video: In-Depth Review of the Dexter Hydraulic Trailer Brake Kit
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Shop: Replacement Right-Hand Uni-Servo Wheel Cylinder Assembly for 7" Brakes - Qty. 1
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Right Hand - 2,500 lbs
- Shop: 7" x 1-3/4" Hydraulic Brake Shoe/Lining (One Wheel) - Dexter
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Q&A: Grease Seal Recommendation for Trailer to Replace 15192TC
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Hub for TDE46210
- Q&A: Bearing Kit that Fits Hubs of 2000 Tracker TrailStar Trailer
- Video: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel Review
- Video: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel: The Breakdown
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Finding the Right Trailer Wiring Harness
- Shop: Trailer Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Search Results: trailer leaf springs
- Article: Trailer Wiring Diagrams
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer hitch
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
on Trailer Hubs and Drums
