Bearing Crossover for a Bearing Marked HR8 720SE
Products Featured in This Question
Question:
do you have a crossover for abearing marked HR8 720SE, AND THE RACE HR8 7.20SE KE AXEL IS 1 OD. I would need 2 of each plus a seal. seal 2 1/32
asked by: Bob A
Expert Reply:
I tried to find information on the bearing and race you listed and no information is available pertaining to those markings. You said the axle is 1 inch OD so it sounds like the TruRyde Trailer Bearing, item # L44643, and the Race, forL44643, item # L44610, may be the correct parts for your application.
The # L44343 bearing has a 1 inch diameter bore and the # L44610 race has an outer diameter of 1.98 inches. If you measure the ID of your bearing and the OD of your race and they match, these parts will work for your spindle and hub.
Product Page this Question was Asked From
Replacement Race for 1779 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.240 Inch O.D.
- Bearing 1779
- Race 1729
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Axle, Hubs, Brakes, and Tires for Older Trailer With Dexter 22834 Hub
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Latch Repair Kit for Bulldog Cast Head Coupler 4420000317
- Q&A: Comparing Chinese Bearings with Bearings Made in the USA
- Q&A: Finding a Hub for a Very Old Trailer with 6 Lug Bolt Pattern # 1779 inner and # 2788 Outer Bearings
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Q&A: Bearings For 15/16 Inch Outer Diameter Spindle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Most Popular Wheel Bearings
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Maintenance Schedule
- Article: Slipper Spring Trailer Suspension System Review
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer