4 Lug Wheel Recommendation for Use with Tire Size 175/70R13

Question

Question:

I am looking for a rim for a utility trailer. 175x 70r13 tiresize. rim is a 4 lug 3 1/2, 2 3/4inch pilot hole.

asked by: Steve M

0

Expert Reply:

For a 4 lug wheel designed to fit tire size 175/70R13 we have the part # AM22322HWT which is a 4 lug wheel that has a pilot diameter of 2.8 inches.

expert reply by: Jameson C

0

Answer 1

A trailer tire size 175/80-13 will replace either an A78-13 or B78-13 trailer tire. A 175/80-13 is going to have 3 load ratings: B at 1,100 pounds at 35 psi, C at 1,360 pounds at 50 psi, and D at 1,610 pounds at 65 psi. This size will have a diameter…

view full answer...

Answer 2

Most likely what you'll want is a wheel and tire combo like the part #AM3S130 which is a tire size of ST175/80-13 mounted on a wheel with a 4 on 4 inch bolt pattern. But we do need to verify your bolt pattern is 4 on 4 inch. Could I get you to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Answer 12

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

4 Lug Wheel Recommendation for Use with Tire Size 175/70R13

Product Page this Question was Asked From

Continue Researching