What Size Bolts Attach Trailer Hitch to Weld Nuts of 2017 Chevy Equinox

Question

Question:

What is the thread size Metric or english on the weld nuts on the frame where the four bolts go?

asked by: Hunter J

0

Expert Reply:

The bolts that secure the hitch part # e98865 to the weld nuts of your 2017 Chevy Equinox are size M12-1.75 x 40mm.

expert reply by: Jameson C

0

Answer 1

What we can do is provide you with the bolt size that is used to install the part #36408 that you referenced and you can find a tap at a local hardware store to clean the threads out if you think they are too corroded. The bolt size is M12 CL8.8. I…

view full answer...

Answer 2

If you take a look at the linked instructions, you can see a listing for all the necessary hardware for the Curt #13591. For the 2017 Equinox, the hitch uses 4 M12x1.75x40mm CL 10.9 hex bolts. We offer a complete replacement hardware kit for the Curt…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 5

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…

view full answer...

Answer 8

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 9

Hey Steven, thanks for reaching out! I really like your list, but I do have a few alternative suggestions if you don't mind. Here is what I recommend: - Blue Ox Base Plate Kit #BO94FR - etrailer Tow Bar #e47ZR (easier to use than the Roadmaster…

view full answer...

Answer 10

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

view full answer...

Answer 11

Hey Ed! It looks like you put together a great list of parts. I'm going to list everything out here with links so it is all in one place, including my suggestions. For a complete setup you will need the following: -etrailer Invisible Base Plate…

view full answer...

Answer 12

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

What Size Bolts Attach Trailer Hitch to Weld Nuts of 2017 Chevy Equinox

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching