How to Adjust Self-Adjusting Trailer Brakes

Question

Question:

How to adjust self adjusting brakes

asked by: Dale S

0

Expert Reply:

I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to turn the adjustment star wheel easier. The video shows the process. I also recommend adjustment spoon # W80630 to make things easier.

expert reply by: Michael H

0

Ron H.

4/25/2020

I am not able to find the link to the video you mentioned above. You describe exactly the fix Im in.Lippert self-adjusting brakes. Cant loosen the star wheel. Dont see how to release it. Brake locked up tight. Help please.

Reply

Chris R.

4/27/2020

I'm sorry for the confusion - it looks like the video Mike originally linked above is no longer available. I linked a current video below and also updated this answer page.

Helpful Links

tv-demo-performance-tool-accessories-and-parts-w80630.aspx

Reply

Gregg W.

5/30/2020

@RonH Having the same issue as Ron. Brakes locked up and star wheel won’t move. Looks as if the star wheel is designed to move in one direction.

Reply

Michael D.

7/15/2020

@GreggW I recently had my wheel lock up also. I tore that F-ing thing off and replaced with adjustable brakes, still need to adjust the other 3 wheels but don't want to go thru same thing. What a PITA.

Reply

See All (13) Replies to Ron H. ∨

Answer 1

Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…

view full answer...

Answer 2

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 3

To initially adjust the brakes, you will need to raise the trailer and secure it on adequate capacity jack stands. Check that the wheel and drum rotate freely. Do not lift or support trailer on any part of the axle or the suspension system. Remove…

view full answer...

Answer 4

Actually, it is recommended to make the very first brake adjustment manually on self-adjusting trailer brakes such as #AKEBRK-35-SA. This is so the brakes are ready to go without having to wait for them to adjust out while you drive (forward or…

view full answer...

Answer 5

Self-adjusting brake assemblies are the way to go like with the #AKEBRK-7-SA which do fit your 7k Dexter axles. The only real reason to go with manual adjust is really just cost. At one point the self adjusting models were much more expensive but now…

view full answer...

Answer 6

It is possible to loosen up how tight your Self-Adjusting Electric Trailer Brake Kit #AKEBRK-35-SA but it is a little difficult to do, mainly due to lack or room for working. You can potentially remove your hub to make loosening the brake a bit…

view full answer...

Answer 7

Hey Brian, if you grab the magnet and move it in the direction of the arm that it is attached to far enough it will click and it will adjust the star wheel tighter. This will be the easiest way to move the shoes out. Or you can install them and then…

view full answer...

Answer 8

In order to determine the correct hub and drum replacement you will need to know what bearings your trailer is using. Bearing Buddy Bearing Protectors like the #BB1980A-SS that fit a 1.98" hub bore are commonly found on 2,000-3,500 lb axles, so…

view full answer...

Answer 9

There is a way to determine the left from the right without taking off your hub for the Electric Trailer Brake Kit #AKEBRK-35-SA. Take a look at the back of the assembly, and you should see where the wires are sticking out and they are attached with…

view full answer...

Answer 10

Thank you for providing the Dexter part numbers Robert. For the brakes we have the Kit #23-26-27 which contains both the Left #23-26 and Right #23-27 brake assemblies. You might consider upgrading to the Nev-R-Adjust Electric Trailer Brakes…

view full answer...

Answer 11

You will need the Grease Seals #RG06-050 for each of your 4,000LB Dexter axles. These are sold as a pair so that you can replace both seals on one of your axles so you will need 2 kits to replace all 4 seals. The Seal Puller #PTW1219 will help you…

view full answer...

Answer 12

Hello Ivan. Thanks for all the information. 4K axles are not all that common now a days. If you are not loading the trailer at full capacity then you will definitely be safe using the etrailer Electric Trailer Brakes - Self-Adjusting - 10" -…

view full answer...

How to Adjust Self-Adjusting Trailer Brakes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching