Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Due to the orientation of the vent on the regulator part #CAM59005 it is a vertical regulator. For a similar horizontal regulator what you would need is the part #108221 which is a similar 2 stage regulator but is instead designed for the…
view full answer...The valve in your regulator is likely going bad and allowing the gas leak so you would want to replace it. I recommend swapping it out with the JR Products Compact Automatic Changeover 2-Stage Propane Regulator #37207-31525. This has 1/4"…
view full answer...If you have a trailer wheel that has a 6 lug setup you are going to have a bolt pattern of 6 on 5-1/2 inches. This is the standard 6 lug wheel bolt pattern that trailer rims have. If you are unsure you can check out the help article I attached that…
view full answer...Hey Wade, we have a PEX adapter with the part #FL36VR that you can use with the City Water Inlet part #37262135.
view full answer...These are very similar products, the RV LP Gas Regulator, #37207-30395 is a dual stage regulator with auto changeover and rated at 345,000 Btu. The #37207-31525 is rated for 262,000 Btu. Each option has a 1/4" FIF inlet x 3/8" FPT outlet.…
view full answer...A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.
view full answer...I attached a link to a page that has all of the 20 inch pigtail adapters we offer like that you mentioned from the three brands MB Sturgis, Camco, and JR Products. If it were me I would go with the MB Sturgis part #100575-20-MBS as it has the best…
view full answer...The propane regulator I recommend for your 100 lb propane tank is the MB Sturgis Vertical 2-Stage Propane Regulator part #108220 which will need to be mounted in a vertical position. In order to then attach this regulator to your 100 lb propane tank…
view full answer...The adapter you need to install on the 100 lb tank is the part #204128-MBS. This will thread onto the tank and give you the correct fitting for your ACME type 1 pigtail to connect to.
view full answer...Hey Steve, for trailer applications a dual stage regulator will work best. The big difference is a single stage regulator is best in situations where the inlet pressure does not vary by much. Since you'll most likely have higher pressures when…
view full answer...There are a select few fifth wheel hitches that have replacement leg kits that would adapt them to fit the OEM prep package of your Dad's 2023 GMC Sierra 3500 but I would need to know what hitch you guys have to be able to determine if that's…
view full answer...Hello Gale. I can definitely point you in the right direction. Based on the pictures I can see online the 2016 Rpod 179 appears to use a horizontal single tank regulator. Our best option to replace this is the JR Products Horizontal 2-Stage Propane…
view full answer...Related Searches
Filter Your Search
Contact and Help