How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured

Question

Question:

This is a 2011, 19 FT Explorer by Frontier S190. What is the meaning of 5 on 4-1/2. There are 5 lugs on each wheel.

asked by: Dan T

0

Expert Reply:

The 5 on 4-1/2 bolt pattern of a hub or wheel such as # AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will also help.

expert reply by: Michael H

0

click to enlarge

Answer 1

Sometimes the best option is to replace the hub when nothing is available that fits. In your case, we have a wheel and tire combination that will work perfectly so it won't be necessary. The Kenda Loadstar 205/65-10 Bias Trailer Tire #AM3H454 is…

view full answer...

Answer 2

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 3

The metric trailer tire size corresponding to your 18.5 x 8.5 - 8 tires is size 215/60-8. In this size we offer both tires only and pre-mounted wheel/tire combinations that you can see on the linked page. The tires-only are available in two weight…

view full answer...

Answer 4

Whether a load range C or the greater capacity load range D, your will need to keep your tires inflated to their maximum psi rating for best performance and longest life. For a ST175/80D13 with load range D like the Loadstar Item #AM1ST77, the…

view full answer...

Answer 5

If you have a tandem axle travel trailer that weighs 6,000 lbs a Load Range C tire like the part #AM1ST92 would work, but since you said that is the weight when empty you would most likely want to go with the Load Range D just to be safe. For that…

view full answer...

Answer 6

I do have options for you but we don't have any sort of comprehensive list that shows all trailer tires available for any particular trailer model. However, most pop-up tent trailers this size will use 12" or 13" wheels/tires. The Kenda…

view full answer...

Answer 7

As long as that is a 3,500 lb axle with a 4-bolt brake flange on your EZ Loader boat trailer you will be able to use the DeeMaxx Disc Brake Kit #DE42FR. The slip-on rotors will fit over the 5 on 4-1/2 bolt pattern on your existing hubs without any…

view full answer...

Answer 8

The DeeMaxx Disc Brake Kit part #DE42FR will require an actuator for operation. This can be either a traditional surge actuator or an electric over hydraulic actuator. If you're looking for an electric over hydraulic actuator, I recommend the…

view full answer...

Answer 9

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

view full answer...

Answer 10

Trailer brake actuators like the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you're looking at are rated more for the brake type and not necessarily a specific amount of axles since it has to do with the amount of pressure the…

view full answer...

Answer 11

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 12

Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…

view full answer...

How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching