Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
Updated 04/08/2010 | Published 04/07/2010
Products Featured in This Question
Question:
Given that I have a trailer wiring harness, what are the ways to attach the wires to the underside of the trailer? Masking tape? Sodder? If sodder, can the sodder be placed directly on top of the wire as it lays on the metal frame?, Special connectors that attach to the frame what are they called? Thank you
asked by: Joel L
Expert Reply:
There are many ways you can secure wires to a trailer. I would not recommend the use of tape as it will wear out quickly when exposed to the elements. Soldering is also not recommended because it is a more permanent method and you may need to change wires or move them in the future the hot solder would also melt the coating on the wiring, causing a short. If you can find some large enough, wire ties could be a simple solution.
We have several clamps and clips that could work for this application. First is the Wire Frame Clip, # 464600. These clips are designed to secure one or more wires on your frame or panel surface. The height of the Wire Frame Clip is 1-1/2 inches, width is 1/2 inch, width for wire capacity is 3/8 inches, and the frame depth is 5/16 of an inch. It clips to the vehicle or trailer frame and secures with an edge that has two points like fangs.
Next we have the 1/2 inch Metal Loom Clamp, # A0500, and the smaller 1/4 inch # A0250. These clamps usually attached to the frame with self-tapping screws.
Product Page this Question was Asked From
- Electrical Tools
- Cable Management
- Wire Clips and Clamps
- 1/2 Inch Diameter
- Black
- Redline
more information >
Continue Researching
- Shop: PullRite SuperGlide 5th Wheel Hitch for Ford Super Duty Factory Prep Package - 16K
- Search Results: rock tamers mud flaps
- Shop: Pullrite Rotational Pin Box Wedge for Lippert Turning Point, Sidewinder, or MORryde Orbital Hitches
- Q&A: Will Universal Wedge Fit with Pullrite SuperGlide 5th Wheel Hitch for Ford OEM Puck Package
- Shop: Wire Frame Clip
- Shop: BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch - 7-1/4" Drop, 7" Rise - 22,000 lbs
- Article: Trailer Lighting Requirements
- Search Results: maxx air vent cover
- Search Results: torque wrench
- Search Results: maxxair bug screen
- Search Results: torque wrench automotive tools
- Search Results: trailer hitch ball mount
- Search Results: bulletproof hitches trailer hitch ball mount
- Shop: Trailer Hitch
- Shop: Torque Wrench - Dual Scale - 1/2" Drive - 250 ft/lb
- Shop: Trailer Wiring
- Q&A: Does MAXX AIR II Vent Cover # MA86JR Come with Bug Screen
- Video: Let’s Check Out the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip
- Shop: BulletProof Hitches Receiver Lock for Adjustable Ball Mount - 4" Span - Stainless Steel - Qty 3
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Go Power Industrial Pure Sine Wave Inverter Charger: The Breakdown
- Shop: Sidewinder Wedge Kit for Pullrite and Camco Fifth Wheel Trailer Hitches
- Q&A: Differences Between MaxxAir 2 and MaxxAir Standard Vent Covers
- Video: Detailed Breakdown of the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch
- Q&A: Recommended Rack and Roll Trailer for Kayaks and Bikes
- Q&A: What All is Needed to Transport 5 Bikes on Yakima Rack and Roll Trailer
- Q&A: Can Yakima Rack and Roll Tire and Tube Be Mounted Without Going to Tire Shop
- Video: A Closer Look at the Torque Wrench
- Video: Detailed Breakdown of the Torque Wrench
- Q&A: Can Demco Hijacker Autoslide be Used with Curt Turning Point Pin Box
on Electrical Tools
