Does MAXX AIR II Vent Cover # MA86JR Come with Bug Screen

Question

Question:

I am not clear if the vent unit includes a big screen accesory - if not waht is the part # I order with my cover?

asked by: LARRY J

0

Expert Reply:

No the MAXX AIR II Vent Cover # MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

expert reply by: Jameson C

0

Carl

2/17/2024

Wow, that response was very unclear. Is there a version with the bug screen?

Reply

Jameson C.

2/19/2024

@Carl Maxxair does have a roof vent cover that can have a bug screen added with the part # MA00-955001. The screen would then be the part # MA00-955203.

Reply

Answer 1

RV roof vent covers throughout the industry max out at 10-1/4" tall so you'd be limited to this height. Manufacturers know that this won't allow for the vent lid to fully open but have stated that as long as the lid is opened at least…

view full answer...

Answer 2

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA86JR and the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR have very similar dimensions so I doubt anyone would be able to notice any difference in actual ventilation…

view full answer...

Answer 3

Hey Mike, thanks for reaching out! The 16K Pullrite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…

view full answer...

Answer 4

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 5

Hey Mike, it's good to hear from you again! We actually don't fitguide our ball mounts so I'm guessing you've input your 2025 Ford F-250 Super Duty in the fitguide and then used our search tool to find a product - the B&W Tow…

view full answer...

Answer 6

There are many ways you can secure wires to a trailer. I would not recommend the use of tape as it will wear out quickly when exposed to the elements. Soldering is also not recommended because it is a more permanent method and you may need to change…

view full answer...

Answer 7

We definitely have a couple options for you. I do not suggest using multiple reducers with weight distribution, so the Buyers Products 3" to 2" Receiver Tube Adapter #337RTA302 will adapt your 3 inch receiver to a 2 inch without the need of…

view full answer...

Answer 8

Hey Dave, thanks for reaching out! The best option for you is the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches #SHP2040-XL which can work both with 2" and 2-1/2" hitch receivers, but it does require that your…

view full answer...

Answer 9

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 10

Yes, the Reese wedge part #RP99FR is the correct wedge to use with ta Lippert Turning Point pin box and a Pullrite ISR fifth wheel hitch.

view full answer...

Answer 11

Hi Eduardo; congratulations on the new camper. None of the covers will allow the vent to open all the way but that won't be a problem. The MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002 you were looking at will fit and is the tallest…

view full answer...

Answer 12

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Does MAXX AIR II Vent Cover # MA86JR Come with Bug Screen

Product Page this Question was Asked From

Continue Researching