Replacement Vent Cover Recommendation for a 2000 Sundowner Trailer Valuelite 2 Horse Trailer
Products Featured in This Question
Question:
Need to buy a vent cover replacement for a 2000 Sundowner Trailer Valuelite 2 Horse Bumper Pull but Im not sure which vent cover on your website will work? The original cover that was on the trailer was white. Thanks,
asked by: Eric R
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Product Page this Question was Asked From
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Peterson Clearance and Side Marker Trailer Light - Submersible - Incandescent - Amber Lens
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
- Shop: Peterson Clearance and Side Marker Trailer Light - Submersible - Incandescent - Red Lens
- Shop: Replacement Exterior Pop-Up Roof Vent - Aluminum - 13-1/2" x 8"
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: trailer jack
- Shop: Trailer Wiring
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Brake Controller
- Search Results: trailer lights
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Finding the Right Trailer Wiring Harness
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: trailer leaf springs
on Accessories and Parts
