Trailer Brake Controller and Wiring for a 2006 Ford F-450 6.0 Diesel

Question

Question:

I have 2006 Ford F450 6.0 Diesel. according to your catalog looks like part numbers 90195-3065-P should work but. please see my attached picture where showing 2 connectors on this vehicle, Im wondering which cable I need to use?

asked by: Sam C

0

Expert Reply:

Trailer brake controller wiring harness # 3065-P is the correct harness for your 2006 Ford F-450. In your picture, it would plug into the larger one on the right. The larger square end of the harness plugs into your truck's connector and the small flat end plugs into the back of the brake controller # 90195.

expert reply by: Michael H

0

click to enlarge

Answer 1

If your 2006 Ford F-350 already has the factory tow package, then there is a plug right behind the storage compartment that is under the radio which has a port that will accept one end of the Wiring Adapter #3065-P. The other end of the adapter will…

view full answer...

Answer 2

A 10 x 2-1/4 inch brake assembly would typically be found on a 3500 lb axle, and would use a 4 bolt mounting flange whose holes are 2-7/8 inches apart on center. However, there was an exception. Before May of 2009, Dexter manufactured a 4400 lb…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hey John, thanks for reaching out! If the 4-Way on your 1996 Ford F-150 is from the factory then the only wire splicing you'll need to do is with the Adapter #37185, which plugs into your 4-Way and then you'll connect the rest of the wires to…

view full answer...

Answer 12

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

view full answer...

Trailer Brake Controller and Wiring for a 2006 Ford F-450 6.0 Diesel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching