Search: Camper Hold Downs   >   !Cargo Tie Downs   >  

Designed for use with bed-mounted or bumper-mounted camper tie-downs, these stainless steel turnbuckles have built-in levers for quick, simple tightening, making it fast and easy to secure your ...
Features: Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck Lever-action Derringer handles make turnbuckles supremely easy to operate Push down on handle once

• Camper Tie-Downs
• Turnbuckles
• Bed-Mounted
• Bumper-Mounted
• TorkLift
• Quick Disconnect
• Stainless Powder Coated Steel
• Locks Not Included

Steel brackets clamp onto the side rails of your Ford pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install ...
Features: Creates attachment points for securing your camper to your truck bed Wide clamps provide superior holding strength Turnbuckles (sold separately) required to attach camper to tie-downs

• Front and Rear Tie-Downs
• Bed-Mounted
• Brophy
• Powder Coated Steel
• Universal Fit

Add these quick-release levers to your standard HappiJac turnbuckles to get quick, simple tightening action. Compatible with all turnbuckles that have a 1/2" threaded rod. eliminate this difficult step. Once you've reached the desired tension at the initial setup, you can just hook the turnbuckles onto the anchor points on your camper and truck and flip the levers down

• Camper Tie-Downs
• Turnbuckle Parts
• Upgrade Kits
• HappiJac

The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup ...
a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other. Securing

• Front and Rear Tie-Downs
• Bed-Mounted
• Brophy
• Powder Coated Steel
• Universal Fit

Lock down the turnbuckles on your camper tie-down system with these sturdy locks. Pin locks replace the pins that hold your lever-action TorkLift FastGun or Derringer handles in the closed position.Features: Locks secure the TorkLift FastGun or Derringer handles on the turnbuckles of your camper tie-down system Replace pins that hold handles in closed position Deter tampering and theft Rubber

• Camper Tie-Downs
• Locks
• TorkLift

Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your ...
Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Fits tightly into the stake pocket with built-in

• Front and Rear Tie-Downs
• Bed-Mounted
• Brophy
• Powder Coated Steel
• Universal Fit

Basic kit lets you easily secure the front or rear of your truck bed camper to your TorkLift frame-mounted tie-downs. Spring-loaded barrels help minimize stress on tie-down points. Sturdy steel ...
Features: Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck 2 Additional turnbuckles (sold separately) are required to secure all 4 corners of your camper

• Camper Tie-Downs
• Turnbuckles
• Frame-Mounted
• TorkLift
• Standard Disconnect
• Powder Coated Steel
• Locks Not Included

Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple ...
Features: Creates attachment points for securing your camper to your truck bed Wide clamps provide superior holding strength Turnbuckles (sold separately) required to attach camper to tie-downs

• Front and Rear Tie-Downs
• Bed-Mounted
• Brophy
• Powder Coated Steel
• Universal Fit

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Front Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit

Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper ...
Features: Creates attachment points for securing your camper to your truck bed Wide clamps provide superior holding strength Turnbuckles (sold separately) required to attach camper to tie-downs

• Front and Rear Tie-Downs
• Bed-Mounted
• Brophy
• Powder Coated Steel
• Universal Fit

Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure ...
in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding

• Front and Rear Tie-Downs
• Bed-Mounted
• Frame-Mounted
• HappiJac
• Steel
• Custom Fit

The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is adjustable on-the-fly. 2-5/16" Ball and 2" shank included. noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy

• WD With Sway Control
• Severe Sway
• Electric Brake Compatible
• Allows Backing Up
• B and W
• 1400 lbs
• 1500 lbs
• 700 lbs
• 1300 lbs
• 1200 lbs
• 1100 lbs
• 800 lbs
• 900 lbs
• 1000 lbs
• Includes Shank

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle

• Pop Up Camper
• Teardrop Camper
• Travel Trailer
• A-Frame Jack
• Leveling Jacks
• Tongue Jack
• Electric Jack
• Bolt-On
• etrailer
• Steel
• 1 Jack
• 3001 - 4000 lbs

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Front Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit

Designed for TorkLift frame-mounted tie-down systems, these stainless steel turnbuckles have internal springs to help reduce stress on tie-down points. Single-piece turnbuckles offer a clean, sleek ...
Features: Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck 2 Additional turnbuckles (sold separately) are required to secure all 4 corners of your camper

• Camper Tie-Downs
• Turnbuckles
• Frame-Mounted
• TorkLift
• Standard Disconnect
• Stainless Powder Coated Steel
• Locks Not Included

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Rear Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit

Extend the receiver on your Ford Super Duty factory 3" hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains high weight capacity and gives you ...
Features: Extension piece extends Ford Super Duty factory 3" receiver opening to clear obstacles such as your bed-mounted camper so you can tow Heavy-duty design lets you maintain a high towing

• Hitch Extender
• Trailers
• Fits 3 Inch Hitch
• TorkLift
• 36 Inch Extension
• 3600 lbs

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Front Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit

Extend the top receiver on your TorkLift SuperHitch dual-receiver trailer hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains a high weight capacity ...
Features: Extension piece extends SuperHitch receiver opening to clear obstacles such as your bed-mounted camper so you can tow Heavy-duty design lets you maintain a high towing capacity and allows

• Hitch Extender
• Trailers
• Fits 2 Inch Hitch
• TorkLift
• 36 Inch Extension
• 6500 lbs

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on ...
Features: Adjustable roof-rack system lets you carry gear on camper shells, hard tonneaus, or hardtop resin roofs without headliners 2 RTC-style tracks with dual C-channels provide adjustable

• Camper Shell Systems
• Aero Bars
• Rhino Rack
• 54 Inch Bar Space
• Black
• 2 Bars

Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure ...
1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper

• Front and Rear Tie-Downs
• Bed-Mounted
• Frame-Mounted
• HappiJac
• Steel
• Custom Fit

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Rear Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit

This dual-function adapter bar lets you extend your hitch beyond your bed-mounted camper and reduce your hitch opening so that you can have a 2" hitch for towing a trailer or mounting ...
Features: Adapter bar lets you modify your hitch receiver to accommodate your application Extends the length of your hitch receiver to clear obstacles like a truck-bed-mounted camper Reduces the size

• Hitch Extender
• Hitch Reducer
• Bike Racks
• Cargo Carriers
• Hitch Mounted Accessories
• Trailers
• Fits 2-1/2 Inch Hitch
• 2-1/2 Inch to 2 Inch
• CURT
• 24 - 34 Inch Extension
• 6000 lbs

Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets ...
with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle

• Front Tie-Downs
• Frame-Mounted
• TorkLift
• Powder Coated Steel
• Custom Fit