1. Camper Tie-Downs
  2. Brophy
  3. Front and Rear Tie-Downs
  4. Bed-Mounted
  5. Powder Coated Steel
  6. Standard Disconnect
Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4

Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4

Item # HSSF
lowest price pledge
Retail:$187.87
Our Price: $164.44
You Save: $23.43
Camper Tie-Downs
This item qualifies for Free Shipping
Shipping Weight: 45 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails. Call 800-298-1624 to order Brophy camper tie-downs part number HSSF or order online at etrailer.com. Free expert support on all Brophy products. Guaranteed Lowest Price and Fastest Shipping for Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4. Camper Tie-Downs reviews from real customers.
  • All Info
  • Reviews (187)
  • Q & A (299)
  • Photos
  • Why etrailer?

Brophy Camper Tie-Downs - HSSF

  • Front and Rear Tie-Downs
  • Bed-Mounted
  • Brophy
  • Powder Coated Steel
  • Standard Disconnect

Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails.


Features:

  • Tie-downs provide attachment points for securing your camper to your truck bed
  • Wide clamps provide superior holding strength
  • Neoprene pads protect your truck's paint
  • Strong and durable steel construction
  • Black powder coat finish is corrosion resistant
  • Easy to install and remove
    • Clamp each bracket onto the bed rails of your truck
    • No drilling required
  • 4 Camper tie-downs with clamp plates, 12 neoprene pads, and necessary hardware included
  • Made in the USA


Specs:

  • Application: most full-size, non-dually pickup trucks
    • External bed rail width cannot exceed 5-1/2"
    • Requires at least 2" of space beneath lip of bed rail
    • Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
  • Dimensions: 11-5/16" tall x 3" wide x 3/8" thick
    • 8-9/16" From center of bottom mounting hole to center of top mounting hole
    • 3-5/8" From center of left mounting hole to center of right mounting hole
  • Anchor width: 6"
  • 1-Year limited warranty


Brophy Specs

Installation

Clamp Examples

Installing these bed-mounted camper tie-downs is simple. First, attach the T-bolts to the bottom interior portion of each tie-down. Place each tie-down on the rail of your truck so that the straight side faces the interior of your bed and the angled side faces the exterior. Adjust the T-bolts until each tie-down sits square on the rail. Then attach the clamp plates to secure the tie-downs to the rails. To do this, position the clamp plate beneath the lip of the side rail so that the lip is between the plate and the straight side of the tie-down. Then insert a carriage bolt on either side of the setup and tighten the nuts on the bolts until the tie-down is securely clamped onto the lip of your bed side rail.


HoldDown Side View

Securing your Camper

Camper w TieDowns

In order to secure your camper to your truck bed, these tie-downs will need to be used in conjunction with a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper and to the tie-downs on your truck to keep your camper secure. Once you tighten the turnbuckles appropriately, you will be ready to haul your camper.



HSSF Camper Hold Down Black Powder Coated Finish (Qty 4)

Installation Details HSSF Installation instructions




Customer Reviews

Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 - HSSF

Average Customer Rating:  4.6 out of 5 stars   (187 Customer Reviews)

Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails.

- HSSF
by:

These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.


Comments
Still have not moved! Great design and cost savings.
Patrick - 04/06/2021


- HSSF
by:

These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.



- HSSF
by:

Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.


Comments
No problems. Would buy again. Very easy to take on and off the truck.
Ed B - 05/22/2020


- HSSF
by:

These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.



- HSSF
by:

This rating is for erailers product availability, service and pricing. I have not been able to use the tie-downs yet as I just recv'd them yesterday, but they look stout, and quite heavy duty. Thank you etrailer for the fast service as usual.



- HSSF
by:

I received this tie downs on July, and first used it yesterday. My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper. The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.



- HSSF
by:

If I could give a 3.5 out of 5, I would. These tie-downs serve their purpose, but definitely not recommended for a bigger camper. I would say my camper is average sized. These tie-downs hold my camper in place the majority of the time, some small movements when I'm on rough roads, but nothing too dramatic. Negatives. Two of the four lost the padded backing where the tie down meets the inside of the truck bed. Had to go buy some foam and create my own. They flex quite a bit with a camper the size of mine, wouldn't go down any rough roads.



- HSSF
by:

Good product and well built…..if you don’t off-road. There are obviously a ton of variables with campers and tie down points but these just don’t provide enough opposing tension to keep my camper from sliding around in the bed when I get crossed up off-road. If you stay on the pavement or flat dirt roads, they work great.



- HSSF
by:

Ordered these for my new truck to hold my popup camper. As I haven't put them on yet because it's still winter, end of march it will be prepared to be put on. What I will say about customer service is there is nothing like it. Sent me emails updating everything and tracking. I did take a look at them and they look very heavy duty. I look forward to putting them on and gettin out to camping! I'll provide pictures once I get the chance of putting them on.


Comments
Working out great as expected.
Doug - 02/07/2021


- HSSF
by:

I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks. The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something. As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.



- HSSF
by:

Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!



- HSSF
by:

First time we’ve ever purchased from this site and I’m pretty impressed. Shipping was really fast. I got notification that my purchase shipped and would be here earlier than it said it would at check out and then it arrived even earlier than that. As for the clamps they were heavy duty, like I couldn’t even pick the package up off the porch when it was delivered haha. We were a little skeptical they would work on our Ford F-150, husband was nervous about the aluminum bed holding up, and that they would actually keep the camper on the truck. Shortly after we got them on and the camper tied down and before we could really test them out at high speeds, my husband had to make an unexpected trip from the mountains to the Midwest. We were nervous but he reports that they’ve held tight and the camper hasn’t budged. I kind of can’t believe they work so well. I’m so happy since I had to do a lot of persuading to buy the camper and he wasn’t about to spend a bunch on frame mounts. We’re very satisfied with etrailer and the Brophy clamps.



- HSSF
by:

Good for slide ins when no other options are available. I saw people complaining about the mounting hardware but this was solely from not understanding how the hardware was intended to be installed.



- HSSF
by:

As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.



- HSSF
by:

These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping. Overall I am pleased with the quality and price



- HSSF
by:

Love the tie downs Easy to install



- HSSF
by:

These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.


Comments
A year later & they still hold strong.
Jason S - 06/08/2020


- HSSF
by:

Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.



- HSSF
by:

Although could be a little tighter where tie down pinches to bed sidewall,they work great. They are stout,strong and well made. There is little front to back side to side movement. With a good set of turnbuckles, camper sits good.without fabbing the bracket myself I would highly reccomend .



- HSSF
by:

Overall these seem to work fine. The little soft pads immediately fell off but the mounts seem to work well. They have been mounted for a year on my truck and have held up well to the elements. No rust or serious fading issues. They are stronger than the bed rails they are attached to. The pads need stronger adhesive.



- HSSF
by:

ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE



- HSSF
by:

Great company to deal with. I called to make sure part was correct for my truck, submitted order, 3 days later my parts arrived with instructions . Thanks so much...


Comments
1 year and 20K miles later still a very satisfied customer, I would highly recommend their products and service.
Kevin - 04/18/2021


- HSSF
by:

Good product. I have them om a old and heavy camper they work great.



- HSSF
by:

I went elk hunting in Ely Nevada way up in the mountains and those tiedowns were great and look at my mirror every once in a while to see if they were holding tight and they did I am very pleased with them.



- HSSF
by:

Bought these Tie Downs to secure a truck camper to my truck to transport it for my dad. They were quick to install and felt very solid. Most cost effective way I could find.


34
198
Show More Reviews

Ask the Experts about this Brophy Camper Tie-Downs

  • Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum Bed
    We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP. Although certainly...
    view full answer...
    Image 1 for
  • Will Brophy Camper Tie Downs Work on 2020 Chevy Silverado 2500 Long Bed
    Yes, the Brophy camper tie downs part # HSSF that you referenced can fit truck bed that have plastic bed rail covers like your 2020 Chevy Silverado 2500. I attached a picture that shows them installed on a bed rail that has the covers like you mentioned. For hardware to attach the tie downs to the camper we have the # TDHP as well.
    view full answer...
    Image 1 for
  • Will the Brophy Clamp On Camper Tie-Downs HSSF Fit a 2012 GMC Sierra 1500
    Yes, the Brophy Clamp On Camper Tie-Downs part # HSSF will fit a 2007-2014 GMC Sierra 1500 so they will work just fine on your 2012. The tie-downs will not be able to be installed at the very front and rear of the bed but this is due to the design of your bed rather than an issue with the tie-downs. That said, the turn buckles don't need to be perfectly straight so this won't be an issue. If you don't have turn buckles, I recommend the Brophy Basic Turnbuckles w/ Hardware part # TDHP. The...
    view full answer...
  • Why are Frame Mounted Camper Tie Downs for 2018 Ford F-250 More Expensive
    Brophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part # HSWB but the # HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design, and not quite as secure as the frame mounted styles which is why the cost of them is lower. They work but in general people prefer the frame attachment style since it's a much more secure attachment as the frame of the truck is much stronger...
    view full answer...
  • Will Brophy Camper Tie-Downs # HSSF Fit 2008 Tundra CrewMax 4x4 5-1/2 Ft Bed and Factory Hitch
    The Brophy Camper Tie-Downs, # HSSF, are designed to be a universal type fit and will work for most pick-up trucks. Unfortunately there is not a specific vehicle list that they will fit so you will have to go by the measurements of the tie downs and the installation instructions to determine if they will work for your 2008 Toyota Tundra. For a custom design that is confirmed to fit your Tundra, take a look at the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLT2307 and # TLT3304.
    view full answer...
    Image 1 for
  • Brophy Clamp On Camper Tie-Downs Compatibility with Double Wall Truck Bed
    As long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs # HSSF will work. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't have that lip, they you may want to instead consider the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF which won't utilize that lip or the inside of the bed. Then you can simply use the...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Would Brophy Camper Tie Downs Fit 2006 Toyota Tundra
    CR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2006 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo). Torklift offers tie-downs that are a confirmed fit, you can see the different fits available by clicking the provided link.
    view full answer...
    Image 1 for
  • Will Brophy Camper Hold Downs Scratch Paint of Vehicle
    When installed the Camper Hold Downs part # HSSF that you referenced would not contact the sides of your truck bed so you wouldn't have to worry about them scratching anything. When used with the hardware kit # TDHP the camper will be adequately secured to the bed of your truck. Frame mounted hold downs would provide a stronger attachment point. But at the same time we have had zero issues with the Brophy hold downs allowing the camper to slide out the back of the truck.
    view full answer...
    Image 1 for
  • Camper Tie Down Recommendation for 2017 Toyota Tundra
    For tie-downs that will work in your 2017 Toyota Tundra with a 6-1/2 foot bed you will want the Brophy Clamp On Camper Tie-Downs # HSSF. For a hardware kit to secure the tie downs to the camper you would want the part # TDHP.
    view full answer...
  • Brophy Camper Tie Downs that Fit 2017 Chevy Silverado 1500
    For your 2017 Chevy Silverado 1500 the part # HSSF would be the correct camper tie downs. We have confirmed with Brophy that these work on the newer Silverados. For a hardware kit you'd then need the part # TDHP.
    view full answer...
  • HSSF Stake Pocket Tie Downs for 2011 Ford F150
    According to Brophy, the HSSF Camper Tie Downs will fit your 2011 F150 unless it has a double wall bed. The tie downs do not actually attach using the stake pockets, but would clamp to the underside of the bed rails as shown in the provided photo. If you do not have the tie down hardware, you might also be interested in part # TDHP.
    view full answer...
    Image 1 for
  • Will Brophy Camper Tie Down HSSF Fit 2011 Ford F-150
    While we don't have feedback for the # HSSF on your 2011 Ford F-150 positive or negative we have recommended these for several customers with F-150s similar to yours and have not heard back saying they didn't fit. Typically people are more likely to leave feedback when something doesn't work so in this case I would say that no news is, "good news." For the hardware kit to attach the camper to the tie downs you would also want the part # TDHP.
    view full answer...
    Image 1 for
  • Do Brophy Camper Hold Downs Black Powder Coat, Part # HSSF, Stress Truck Bed Top Rails?
    The Brophy Camper Hold Downs, Part # HSSF, install without drilling and use the included padded T-bar hardware to evenly distribute forces downward and inward toward the inside of the truck bed. The top rail itself bears only some of the load from the tie-down points since most stress is distributed to the inside of the bed. I have attached the installation instructions for this item for your review. You will want to review this part for compatibility with your specific year/make/model...
    view full answer...
  • Recommended Truck Bed Camper Tie Down Kit for 2016 Chevrolet Colorado
    The truck bed camper tie down system we show to be confirmed to work on your 2016 Chevrolet Colorado is the Tork Lift, parts # TLC2221 and # TLC3218, which are the front and rear components. I contacted Brophy about use of their kit # HSSF. Since this kit is intended for full-size pickups they have not tested it on the Colorado. The key factors that matter for its fit are that the truck NOT have a drop-in bed liner, plastic bed rails, a double-wall bed nor a side step type bed. Also...
    view full answer...
  • Would Brophy Camper Tie Downs Fit 2002 Toyota Tundra
    CR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2002 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo). Then for a hardware kit you would need the part # TDHP.
    view full answer...
    Image 1 for
  • Do Brophy Camper Tie Downs have a Weight Capacity Rating
    There is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
    view full answer...
  • Recommended Camper Tie-Downs For 2017 Ford F-350 Super Duty Truck
    We do have camper tie-downs other than the Torklift, but there are several restrictions for their use. One of the tie-downs is part # HSSF. These clamp onto the bed rails of your truck. The restrictions are the bed rail cannot exceed 5-1/2 inches wide, and they require at least 2 inches of space beneath the bed rail, and they are not compatible with trucks that have drop-in bed liners, plastic bed rails, double-walled beds, or step side trucks. I have attached a photo that shows how...
    view full answer...
    Image 1 for
  • Camper Tie-Down Fit For 2007 Toyota Tundra
    The Brophy Camper Hold Down # HSSF is a more universal fit style camper tie-down. We unfortunately do not have test fit information on them, and have not had the chance to install them ourselves on a 2007 or same generation Toyota Tundra. We did have a customer purchase the # HSSF for his 2000 Tundra, and he did not have any issues with them fitting over the sidewall of his truck bed. The # HSSF comes with 4 camper tie-downs. We do offer custom fit camper tie-downs for your 2007...
    view full answer...
  • Comparing Brophy Camper Tie Downs # HSSF and # HSAB
    The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF and the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB will be equally strong. I reached out to my contact at the manufacturer and they said the tie down strength will be limited by your vehicle and that the only difference between these tie downs is the tab and where it connects. I've attached videos of both products for you.
    view full answer...
  • How Tight to Make # HSSF Turnbuckles for 1997 F-250 Carrying 9-Foot 2500-lb Slide in Truck Camper
    The Brophy Camper Tie Downs # HSSF that you referenced do not carry a specific weight or torque capacity since this really is a consideration for the truck that is hosting the slide-in camper. The turnbuckle hardware included in this kit should be hand-tightened as much as you need to, but no tools should need to be used. My contact at Brophy pointed out that, as noted in the instructions that I have linked for you, the front holdowns should be positioned as far forward as possible...
    view full answer...
  • Brophy Camper Tie Down Recommendation for Truck with Aluminum Truck Bed
    Yes, Brophy has recommended the # HSSF for trucks with aluminum beds like yours so this would be a great option. For a hardware kit you would need the # TDHP.
    view full answer...
  • Will the Camper Hold Downs, # HSSF Fit a 1975 Rancho El Rae and Ford F-250
    The Camper Hold Downs, # HSSF, will work with any camper that is a fit for your truck. These hold downs do have some limitations as to what trucks they will fit. If your truck bed is a step side or has a double wall, they will not fit. However it is likely that it will work for you. Take a look at the installation pictures I have included for you. I also recommend using the camper tie down hardware package, # TDHP.
    view full answer...
    Image 1 for Image 2 for
  • Will the Brophy Camper Hold Downs # HSSF Work with a Pop Up Truck Bed Camper
    The Brophy Camper Hold Downs, part # HSSF, will be able to handle a pop up truck bed camper. We even had a customer comment that it worked great with his Palomino pop up camper in his Ford F-250. If you are interested in these hold downs, there are a few things to consider. First, this hold down willl not fit step side beds, double wall beds or dually models. It will also not fit the 2004 to 2008 Ford F-150 as well as some import trucks. To use these tie downs, you must have a minimum...
    view full answer...
  • Do Brophy Clamp On Camper Tie-Downs Have A Weight Capacity
    There is no weight capacity for the Brophy Clamp On Camper Tie-Downs # HSSF. The tie-down hardware kit # TDHP, that is used to secure the camper to the # HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will handle the camper and the concern would be if the truck capacity was not able to handle it, but with an F-350 you should have no issue. Since the front tie-down is behind the camper tie-down, the rear tie-down must be forward of...
    view full answer...
  • How to Connect Camper Tie Downs to Camper
    The HSSF hold down brackets would use the Tie Down Hardware Package, part # TDHP, which includes hooks, chain and turnbuckles. The tie down hardware would typically attach to existing eye bolts built into the underside of camper. If your camper does not have such an attachment point, you can add them, as long as they attach to the frame of the camper. The Steel flanges shown in the photo you provided could be used as attachment points for the hardware if they are connected to the camper...
    view full answer...
    Image 1 for Image 2 for
  • Weight Limit For Brophy Camper Hold Down # HSSF On 1995 Ford F-250 Longbed
    After speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down # HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle owners guide to find the weight limit of your cargo bed. You will also need to ensure there is at least 2 inches of space between the truck bed interior wall and the lip of the bed in order for the hold downs to fit properly. I have included...
    view full answer...
    Image 1 for

Do you have a question about this Camper Tie-Down?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper tie-downs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper tie-down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Zack K
Video Edited:
Zack K
Employee Patrick B
Video by:
Patrick B
Employee Matthew K
Installed by:
Matthew K
Employee Cole B
Installed by:
Cole B
Employee Rachael H
Updated by:
Rachael H
Employee Amanda M
Updated by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624