Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
When using the snow chains try not to go over 30-40 miles per hour. If the chains are used only when necessary they should last many years.
view full answer...To get the light functions on your RV to transfer to your 1986 Toyota Pickup when flat towing I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit Item #RM-15267. This kit provides the wiring from the plug to your taillights, the…
view full answer...I spoke with Demco and their technician stated the easiest way to install your Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to cut the 90 degree angle fitting attached to your…
view full answer...There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…
view full answer...There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…
view full answer...The Replacement LED Monitor Light part #SM99612 has two connections, the red wire which will splice into the stop light switch circuit (or breakaway if stop light switch circuit is not active) and the black wire will splice into the black wire…
view full answer...You can connect the Replacement LED Monitor Light #SM99612 to the blue wire of the breakaway switch that comes with the SMI Stay-IN-Play DUO #SM99251 but since you don't have to disconnect the battery on your 2004 Jeep Liberty you can just route…
view full answer...I attached a diagram that shows how the monitor wire gets installed with the Roadmaster Inivibrake part #RM-8700. Since you don't have the same blue wire you'll need to use a circuit tester like part #PTW2993 to test all of the wires that are…
view full answer...For your 2003 Nissan Frontier, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118362. This has a built in tail light converter because most trailers run on a two-wire system and your Nissan has a 3 wire…
view full answer...The Hopkins Tail Light Converter #HM48847 combines the signals from your truck to pass them to your towed trailer; however this won't work in reverse if you were to install this on your trailer. Since you're looking to add functionality of…
view full answer...The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…
view full answer...The Thinline LED Trailer Tail Light part #STL64RB is a three function light with those functions being stop, turn, and running. It has a three wire design with the white wire being ground, the black wire for the tail lights, and the red wire for the…
view full answer...Related Searches
Filter Your Search
Contact and Help