# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 4
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Items packed well delivered on time. Doesn't get much better that that.
The service is great and so is the price. Box came damaged but if it installs as easy as the last one I bought from etrailer I will be very happy!
# 6
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
This slightly longer than average bar was perfect for my application. The drop length was perfect also for the application. As usual, eTrailer's site and retail experience was first rate. Lots of info and specs (and videos) available makes it easier to get that piece of mind knowing that what you needed was what you ordered.
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 8
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
I wasn't sure what type of ball mount I needed for my new Mazda CX-9, so I had to call a representative. The first time I called, the very knowledgeable gentlemen told me exactly how to measure my SUV to figure out the drop I needed. I called back the next day and talked to a lady who helped me figure out exactly what I needed. This is my second purchase from etrailer. The first was a hitch for my old Honda Odyssey, which was also a great experience. The employees are so helpful, the video tutorials on the web site are fantastic and the prices are great. etrailer.com is the first place I go to look for trailer and towing supplies!
I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once. I decided to buy a new ball mount and mount the new 2" ball. This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
I am an infrequent trailer user, but getting my daughter home from college was necessary in March. This drawbar fits my hitch and utility trailer well, did exactly what it is supposed to do, and was the last thing to be concerned about right then. I have a '11 Mini Countryman S with a Class II receiver from Mini Fini, (which cost twice as much as a Curt) where the hole is flush with the fake grille near the bottom of the bumper cover, so I needed the long bar to reach out past the bumper. The Curt receiver for that car hangs visible underneath the bumper (ugly), which also increases the lever arm on the receiver beam and would have needed an even taller rise. (Curt take note!) All just part of the kit to create an occasional 1 ton pickup out of my Mini, leaving the "bed" at home most of the time.
Fits perfectly. I just wish you would’ve sent a pin with it because I had to go chase that down and get an aftermarket one at Ace Hardware.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 12
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Easy ordering, fair pricing, prompt delivery...product arrived in excellent condition, very heavy duty drawbar for use with by 4ft x 8ft medium duty trailer.
Solid quality and workmanship.
# 13
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 14
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
tl;dr good experience with warts. The etrailer-branded ball mount kit I ordered was back-ordered for a month, which was fine. Eventually Ashley E told me it would be a _second_ month. Not fine. She helped me configure a new order of third party parts. Shipped in one day. Great! Not great: Parts were just thrown in a box with no protection. UPS did their usual thing. Paint was chipped in a couple of places; would surely rust. I'll shoot these spots with some spray paint before installation. Hope that's a fix. I can't afford to diddle with a return.
Ordered the ball mount on Thurs and it arrived Monday. George emailed me Friday and said thanks for ordering again, I had ordered a full hitch the week before, so he expedited shipping on this item. I have ordered many times from etrailer and they have never disappointed. GREAT CUSTOMER SERVICE!!
# 15
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 16
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
Works perfectly. Fast shipping. Very Satisfied.
# 17
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
Nice solid (not hollow) and WELDED hitch. Have logged about 5,000 miles this year with no problems. I had many problems with bolted on balls, welded hitches are the way to go.
Exactly what I needed for my new Subaru hitch and quick delivery. Fusion ball mount nice feature..no need to remember to tighten before each use.
# 18
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
As always etrailer has the best products, best information and customer service, plus fast shipping! Thank you again!
# 19
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
I bought this on my knowledgeable brother's advice - he gave me the exact order number and link to buy from etrailer! I had it installed locally, without complications. I use my truck mostly to haul my horse or my friend's two donkeys in my 14-foot stock trailer. I have no complaints, the hitch does what it's supposed to do.
Easy install, everything included, and great instructional video. Worked out great for my RAV4.
# 20
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
The team at etrailer relayed helped find the right solution. Using this ball mount fixed the height issue I had with my SUV not lining up with the trailer. Very grateful for their help.
Works great!! I always order from etrailer Customer service and fast delivery
Curt Tri-Ball Mount Review - 2013 Toyota Sienna
Today on our 2013 Toyota Sienna we'll be testing fitting the Tri-Ball Mount from Curt for 2-inch hitches. Part number C45001. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style or after-market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with a pin and clip.
MaxxTow Tow Strap Loop Review - 2013 Toyota Sienna
Today on our 2013 Toyota Sienna, we'll be test fitting the MaxxTow tow strap loop for 2" hitches, rated at 10,000 pounds, part number MT70029. You can use this heavy duty hitch mounted shackle as an attachment point for strap, cable, or rope. Can be used in agricultural, industrial, or recreational applications. We'll begin our test fit by sliding the shank into the opening of the hitch, and securing it with the pin and clip, which is sold separately. It is made of a powder coated steel that resists rust. And with it installed, that'll complete today's test fit for the MaxxTow tow strap loop, part number MT70029 on our 2013 Toyota Sienna. .
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota Sienna
Today on our 2013 Toyota Sienna, well be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with a inch rise or 2 inch drop, rated at 10,000 pounds, part number AMSC2. Before we begin our test fit, well firstly obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11-1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style or aftermarket accessories. Well begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch.
Draw-Tite Ball Mount Review - 2013 Toyota Sienna
Today on our 2013 Toyota Sienna we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or a 2 inch drop rated at 7,500 pounds, part number 2923. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height might vary due to tire size, hitch style or aftermarket accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Toyota Sienna
Today on our 2013 Toyota Sienna we'll be test fitting the Convert-A-Ball cushioned ball mount for 2 inch hitches with a 1 inch rise or a 2 inch drop rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip.
Draw-Tite Ball Mount Review - 2012 Toyota Sienna
Today on our 2012 Toyota Sienna well be test fitting the Draw Tite Ball Mount, part number 2923. First we want to go over measurement on the vehicle. We want to measure the hitch height. Thats from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Toyota Sienna
Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Toyota Sienna
Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size, or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches.
Draw-Tite Ball Mount Review - 2006 Toyota Sienna
Today on our 2006 Toyota Sienna, well be test fitting the Draw-Tite Ball Mount with three quarter inch rise or two inch drop rated at 6,000 pounds, part number 2923. Now before installing our ball mount, well first need to get our hitch height measurement. To do this, well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches. Now keep in mind that measurement can change due to hitch style, tire size or any other accessories which may change your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin and clip and with that our ball mount is secured to the vehicle in the drop position.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Toyota Sienna
Today on our 2006 Toyota Sienna, well be test fitting the Convert-A-Ball Cushioned Ball Mount for 2 Inch Hitches with three quarter inch rise or two inch drop. This ball mount is rated for 10,000 pounds. Part number AMSC2. Now to being our test fit well need to get our hitch height measurement. To do this well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches.
What our customers are saying:
"very easy to shop"