bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 2 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 6 Inch
  6. Rise - 5 Inch
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs

Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs

Item # 40346
Our Price: $38.00
You Save: 28%
Trailer Hitch Ball Mount
Shipping Weight: 10 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs part number 40346 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2394)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - 40346

  • Fits 2 Inch Hitch
  • Fixed Ball Mount
  • Drop - 6 Inch
  • Rise - 5 Inch
  • No Ball
  • 6000 lbs GTW
  • Class III
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 1 Inch Ball Hole Diameter

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Sturdy steel construction with hollow shank
  • Both drop and rise positions available to ensure level towing
  • Hitch pin and clip or hitch lock sold separately


  • Application: 2" x 2" trailer hitch receiver
  • Gross towing weight: 6,000 lbs
  • Tongue weight: 600 lbs
  • Length: 10-1/4" from center of hitch pin hole to center of ball hole
  • Rise: 4-3/4" from top of inside of hitch opening
  • Drop: 6" from top of inside of hitch opening
  • Ball hole diameter: 1"

How to Measure Drop on Standard Ball Mount

40346 Ball Mount 4-3/4" Rise or 6" Drop, 6,000 lbs

Replaces 80240

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs - 40346

Average Customer Rating:  4.9 out of 5 stars   (2394 Customer Reviews)

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole.


Ordered the ball mount on Thurs and it arrived Monday. George emailed me Friday and said thanks for ordering again, I had ordered a full hitch the week before, so he expedited shipping on this item. I have ordered many times from etrailer and they have never disappointed. GREAT CUSTOMER SERVICE!!


As usual , God products , Great service, easy ordering , and quick shipping ! All at a very good prices.
Who could ask for more?
It's what makes them a first call ( click ) for all of my trailer and towing needs!


Good fit, well made, worked well on first use, ball attached easily, was the reciever I was looking for.


Lori was awesome and helpful in answering questions. Product was just what the doctor ordered. Thank you so much.


Products came sooner than expected with it being so close to the holiday. Everything has gone together as expected. I included a photo of where the hitch height is on our 2013 Dodge Grand Caravan which I would have appreciated while deciding on which products to purchase. Thank you!


This high quality ball mount is perfect for my 2019 GMC Terrain. Thanks for the great products and wonderful service.


Hitch is correct measurement. After a year, no rust, and still true


Not a problem with the product. Just between the receiver and the trailer hitch assembly, there wasn't any pin to hold the pieces together. I was hoping it was all complete, but now I have to find the pin the holds everything together when towing. Not an end of world, but an annoyance.

Etrailer Expert

Victoria B.


The pin and clip and not included with this ball mount. They are available separately as part # PC3.


I have never been so happy to have bought this product. Its has gone way past my expectations. Easy to install, and has held up and pull so much more then I ever thought it could. The staff at etrailer has been awesome, the service has been awesome, I will continue to do business here.


Just what I needed , good quality
fast delivery Thank you


Product arrived on time with no problem s.


Ball mount and ball came in only 3 days after placing order.

Product is in perfect condition & I will use it this Monday towing my boat.

John H.


Trailer hitch has performed like a champ. Towed my boat flawlessly. The installation was very easy to do. Only problem was the dirt in the cars threads which had to be tapped out but that was not the hitch installations problem.


I had trouble finding a 4-3/4" rise at any local stores. Etrailer shipped it out in a reasonable amount of time. Using this to pull a small trailer behind a Toyota Sienna and needed the 4-3/4" rise.
Packaging needs some thought. 2" ball was coming out the side of the box when it was received.


Ashley was able to help us order what we needed for our hitch quickly and easily. Also available on the website was a link that showed how to install the hitch and attach the wiring.


Good to buy a product that's EXACTLY as described. The 4 3/4" rise is what I needed. I previously bought a "Curt" mount from a local store and the actual rise was a full 1/2" different than what the decal on the mount stated. This DrawTite has clean looking welds and a nice finish. Angled cut makes inserting smooth. I appreciate that the large sticky decal peels off cleanly.


Part of my order was lost, the friendly people at etrailer were kind and courteous. They helped me by replacing my lost item. I will always be a satisfied customer from now on! Great job!!!!


perfect fit


perfect. have bought several products from these folks. never a complaint. great prices, quality products and a wealth of installation information.


Well made, nice coating and fits perfectly of course. I have a tall truck and needed to match my OHV hauler and this was a perfect choice and is the perfect height. I appreciate that etrailer always has what I need - always the perfect product.


etrailer selection, prices and customer service are always excellent...and this order reminded me that speedy shipping is another of their strengths. Thanks!


Just the size I needed. Looks strong.


Parts were shipped right away. The order was exactly what I ordered and good quality. When I need additional parts this IS where I will shop. Thanks for the great commutation and customer service.


It raises the back of my 2014 Sedona and allows me to pull my Casita camper higher off the ground. Glad I bought it.


I have to take it to someone to screw the ball on to get it to the appropriate torque but..... seems very solid!!!! I wish it could have come already put together.


Very nice, well made and works perfect

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Does The Curt RockerBall Shock Absorbing Hitch Ball Have More Of A Rise Compared To A Standard Ball
    You are correct the Curt RockerBall Shock Absorbing 2" Hitch Ball - 1" Diameter Shank - Chrome - 7.5K part # C40047 does have a rise. On a standard hitch ball it sits flush with the ball mount but the RockerBall has the included height of the shock absorber which makes it about 1-1/2" taller than a standard ball. This is important when choosing a ball mount. You want to choose a ball mount that has an additional 2" of drop if your ball mount is in the drop position. For example if your...
    view full answer...
    Image 1 for
  • 6 inch Drop Ball Mount Recommendation for Truck Towing Motorcycle Trailer
    When determining how much drop you need from a ball mount you have to measure from the top of the hitch opening to the ground and then from the bottom of the coupler lip on the trailer down to the ground when it is sitting level. So since you measured from the bottom of the 2 inch hitch and got 17 inches that would mean you need a drop of 6 inches actually. For a ball mount you then would want the part # 40346 which has a 6 inch drop. For a hitch ball with a 2 inch diameter you then...
    view full answer...
  • What Size Hitch Pin for Use with Ball Mount # 40346
    A standard 5/8 inch pin like the part # PC3 would be what you would need with the Draw Tite ball mount part # 40346.
    view full answer...
  • Ball Mount with 6 inch Drop and 1-7/8 inch Hitch Ball
    For a 6 inch drop ball mount that would fit the 2 inch hitch of your 2019 Subaru Ascent we have the Draw Tite part # 40346 and then for a 1-7/8 inch hitch ball you'd want the part # 19260 and you'd be set. The Curt ball mount does not have the smaller ball size available for it since the ball hole is larger.
    view full answer...
  • How to Determine Correct Rise/Drop for Ball Mount on 2022 Honda Palisade Limited
    The correct rise/drop for a ball mount on your 2022 Honda Palisade Limited depends on the trailer you will be towing. In order to determine this you will need 2 measurements. The first is the hitch height and the second is the coupler height. It is also worth noting that the rise and drop on the ball mount are measured from the top of the shank to the top of the ball platform. The hitch height is the distance from the ground to the top of the receiver opening. For the # C13427 that measurement...
    view full answer...
  • Which Trailer Hitch Ball Moints are Compatible With Reese Friction Bar Sway-Control Bracket?
    The bracket you are referencing # RP26003 is designed for the more traditional fixed mount style ball mounts like # 40346 for example. I've attached an article to help you with the rise or drop needed for your application. If you want to use an adjustable ball mount there are more limited options for sway bar compatibility. The MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs # MT70067, the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4"...
    view full answer...
  • Recommended Ballmount for Draw-Tite 75916 Class III Hitch Installed on 2012 Volvo s60
    We haven't had the opportunity to install the Draw-Tite 75916 Class III hitch on a Volvo S60, but when we installed it on a V60 which has about the same ride height at the rear, we found the receiver height to be right at 11-1/2 inches, which means you'd want a ball mount with around a 5-1/2 inch rise. The Draw-Tite # 40346 has a 4-3/4 inch rise which would put you close enough to the height you need to be, it's not necessary to have it perfectly exact. For a 1-7/8 inch ball, use # 19260...
    view full answer...
  • Ball Mount Recommendation for 2016 Toyota RAV4 Hybrid
    The Draw-Tite # 2753 will give you just shy of 3 inches of rise. The next step up from that as far as rise goes would be the Curt # D-28 which would give you 4 inches. You'd also need a # PC3 hitch pin. For almost 5 inches of rise, use the Draw-Tite # 40346 along with the same hitch pin. Keep in mind that the hitch and the trailer coupler height do not need to be exactly the same, but the closer you can get, the better. If you can get within 1-2 inches, that's plenty close enough.
    view full answer...
  • Trailer Hitch Fit for 2020 Toyota Rav4 Hybrid Limited
    As far as aftermarket hitches go, there is no fit differences between the gasoline and Hybrid RAV4 models. Curt confirms that the # C13416 Class III hitch fits all models of the 2020 Toyota RAV4, including the Hybrid. If you'll be towing with the hitch, you'll need a few other items to complete your towing system. For a trailer wiring harness, use # C56434. For a ball mount, use # 40346 and the # PC3 hitch pin. For a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. I've...
    view full answer...
  • Trailer Hitch Fit for 2000 Dodge Grand Caravan Sport
    According to Draw-Tite, their # 75119 Class III hitch is a fit for all models of the 2000 Dodge Grand Caravan, including the Sport model. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118334, a ball mount like # 40346, a # PC3 hitch pin and a # 19260 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball. I've linked to a product install video for the hitch.
    view full answer...
  • Adjustable Ball Mount For A 2014 Mercedes Benz GLK
    To get your ball to the height you are wanting on your 2014 Mercedes Benz GLK I recommend using an adjustable mount. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black Item # BWTS10038B. It provides a 1-7/8" ball and a 2" ball for different trailer couplers and fits 2" receivers. It is going to provide a 5-1/2" rise so it is going to provide the adjustability you are looking for. I recommend making sure the trailer doesn't exceed the weight capacity...
    view full answer...
  • Trailer Hitch and Towing Accessories for 2017 Nissan Rogue AWD
    The only fit exclusion for the Draw-Tite # 75902 Class III trailer hitch on a 2017 Nissan Rogue is the Sport model. As long as your Rogue isn't the Sport model, the hitch will fit perfectly. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118480, a ball mount like part # 40346, a hitch pin like # PC3 and for a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. I've linked to installation videos for the hitch and the trailer wiring harness.
    view full answer...
  • 2013 Toyota Venza Recommended Ball Mount for Towing a Camper
    I am happy to help you find the right hitch for your specific towing needs. I recommend the # AMSC6 Cushioned Ball Mount. This fits a 2 inch hitch receiver and will give you the 4.75 inch rise you need to meet your 18 inch coupler. In the rise position, this hitch has 4 inches of clearance between the back of the mount and the hitch pin hole so you will want to make sure that (will) fit your installed hitch receiver. I (have) attached a video for you to reference and see these dimensions....
    view full answer...
  • Ball Mount Storage Bag for Hidden Hitch Ball Mount with 6 Inch Drop
    The Ball Mount Bag # ETBMB is 16-1/4" long x 5-1/4" high x 4" wide and may fit your Hidden Hitch 80240 our part # 40346 ball mount at an angle. Another option is the Rightline Gear Custom Roll Bar Storage Bag - Jeep - Water-Resistant - Black # RL100J70-B which is large enough to handle your ball mount and is durable.
    view full answer...
    Image 1 for
  • Will The Class III Hitch Fit A 2022 Honda CR-V Hybrid?
    The Class III Trailer Hitch # e98848 is actually designed to fit all options of 2022 Honda CR-V, including your Hybrid. You are also correct in that the Draw-Tite # 76128 not fitting Hybrid models or your year CR-V, so don't worry about that hitch. The wiring is also specific to an option, but not necessarily Hybrid or non-Hybrid. However, as all the Hybrid models came standard with All Wheel Drive, you will need the Tekonsha T-One Vehicle Wiring Harness # 118741. This is...
    view full answer...
  • Trailer Hitch and Install Recommendation for 2016 BMW X3
    We don't have any specific recommendations, but any trusted mechanic would usually be able to complete a hitch installation without difficulty. However, a mostly-concealed design hitch like the Draw-Tite # 76226 you'd looked at would require that the bumper and bumper cover which is a pretty extensive process. Because of that, your local body shop would be a better choice as they'd be more familiar with removing and reinstalling parts like bumper covers/fascia. If you'll be using the...
    view full answer...
  • Does Exhaust Need Lowering To Install Curt Class III C13416 on 2020 Toyota RAV4
    Per the instructions, it's not necessary to lower the exhaust to install the Curt # C13416. This being said, you might find it easier to get the hitch into place and insert the fasteners if the exhaust is out of the way. This is why our technician chose to do so. If you'll be using the hitch for towing a trailer, you'll also need a # C56434 wiring harness, a # 40346 ball mount in the rise position, and a # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch. I've...
    view full answer...
  • Will Installing Hitch on 2021 Toyota RAV4 Hybrid Limited Prevent Hands-Free Liftgate From Working
    The Curt Class III hitch you'd looked at, part # C13416 is a fit for your 2022 Toyota RAV4 Hybrid Limited. The receiver tube will prevent the sensor from picking up movement at the center of the vehicle, but if you wave your foot a few inches left or right of the receiver tube, the sensors will pick up the movement and operate the liftgate. There's kind of a sweet spot where the sensors work best, but once you find that, the hands free liftgate feature will work just fine. If you'll...
    view full answer...
  • Will Curt C13416 Class III Hitch Affect Hands-Free Liftgate and Parking Sensors on 2020 Toyota RAV4
    According to Curt, the hitch may interfere with the power liftgate function or possibly cause it not to function all together. However, we have not received any product reviews stating it completely shut down that feature. It's much more likely that the receiver tube will cause the liftgate sensor under the center of the bumper not to function, but if you try to either side, they'll work just fine. We've received over 600 customer reviews for the Curt and Draw-Tite Class II and III hitches...
    view full answer...
  • Recommended Hitch and Towing Equipment for Towing Small Enclosed Trailer with 2017 Jeep Cherokee
    The Curt Class III part # C13171 would work great for towing a small enclosed trailer, as long as its fully loaded weight is less than the 2000 lb towing capacity of your Cherokee. The hitch itself has a higher capacity, but you'll be limited by the capacity of the lowest rated component, which is the vehicle in this case. No fascia trimming is required and as you can see in the linked video, installation is pretty simple and straightforward. You'll also need a trailer wiring harness...
    view full answer...
  • Ball Mount For Volvo XC90 With Draw-Tite Hitch 76194 to Tow U-Haul Trailer
    For your Volvo XC90 with the Draw-Tite # 76194 trailer hitch, you'll need a ball mount with 4-1/2" to 5" of rise, and we have the exact part for that. You'll also need a hitch ball and hitch pin, so I'll go ahead and list out below exactly what you need: - Draw-Tite Ball Mount - 4-3/4" Rise # 40346 - 2" Hitch Ball # 40038 - Hitch Pin # ML1465DAT
    view full answer...
  • Class III Trailer Hitch Fit for 2018 Jeep Renegade Altitude
    The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e37AR is a confirmed fit for all models of the 2018 Jeep Renegade, so it'll work perfectly on your Renegade Altitude. If you'll be towing with the hitch, you'll need a few additional items to complete your towing system. For a trailer wiring harness, use # 118651. For a ball mount, use # 40346 along with a # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 63845 for a 2 inch.
    view full answer...
  • Is Fascia Trimming Required to Install Draw-Tite Hitch on 2020 Honda Passport
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 can be installed on your 2020 Honda Passport by simply raising the hitch into position and tightening the included hardware to the specs listed in the installation instructions. This is one of the easiest and simplest hitch installations and does not require any modifications to the fascia, bumper or any other part of your vehicle. To complete the trailer towing package on your 2020 Passport, you may consider the following products: Curt...
    view full answer...
    Image 1 for
  • Recommended Ball Mounts For Curt RockerBall Shock Absorbing Ball
    I may have an option for you but the Curt RockerBall Shock Absorbing 2" Hitch Ball part # C40047 is a 2" ball with a 1" diameter shank so this will not work for your ball mount with a 5/8" hole. If you would like to switch out your ball mount you can use the RockerBall with a ball mount with a 1" diameter I have attached a couple of ball mounts below that will work with the Rockerball since I am not sure how much rise/drop you need in a ball mount. Curt Ball Mount for 2" Hitches - 3/4"...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch Ball Mount?

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Zach D
Video by:
Zach D
Employee Brent H
Test Fit:
Brent H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.