Product Experts Available Now!
Call 1-800-940-8924
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
(1395 reviews)
Price: $129.01
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Part Number: AMSC10
In Stock
$129.01
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1395)
- Q & A (0)
- Photos
Convert-A-Ball Trailer Hitch Ball Mount - AMSC10
Highlights
- 8,000 lbs GTW for Heavy Loads: Handles large campers, boats, and equipment trailers with 2,000-lb tongue weight.
- 10" Drop or 8-3/4" Rise for Level Towing: Keeps tall or lifted setups even when switching trailer heights.
- Polyurethane Shock Absorber Inside: Cuts bounce and vibration to protect cargo and driveline parts.
- Steel Shank with Powder Coat Finish: Resists rust and wear from rain, salt, and road grime.
- Fixed Mount for 2" Hitch Receivers: Simple slide-in design for steady towing without play.
- 1" Ball Hole Diameter for Custom Fit: Accepts standard hitch balls like 2" or 2-5/16" options sold separately.
Features to know about
Smooths Out Rough Roads: Shock-Absorbing Polyurethane Core
Hauling over uneven pavement or gravel can send every bump straight through the hitch. This ball mount uses a polyurethane interior that cushions the connection, cutting down bounce and vibration as you drive. It helps protect your driveline, hitch assembly, and trailer contents from the jarring hits that come with sudden stops or rough surfaces.
Keeps Your Trailer Level: 8-3/4" Rise or 10" Drop
Whether your trailer sits higher or lower than your tow vehicle, keeping it level is key for a stable pull. This fixed mount provides an 8-3/4" rise or a 10" drop so you can dial in the right height for balanced towing. The shank measures 11-1/2" from the hitch pin hole to the ball hole, giving plenty of clearance for easy hookups.
Built for Heavy Loads: 8,000 lbs GTW and 2,000 lbs Tongue Weight
When you’re pulling serious weight, you want equipment you can count on. This mount is rated for 8,000 lbs gross towing weight and 2,000 lbs tongue weight. The solid steel shank gives it the muscle to handle big trailers, campers, or boats without flexing under pressure.
Resists Corrosion and Wear: Durable Powder Coat Finish
Towing means dealing with rain, road salt, and grime that can chew through metal fast. The gloss black powder coat stands up to corrosion and keeps the steel shank protected trip after trip. You can leave it on between hauls without worrying about rust taking hold.
Simple, Reliable Setup: Fixed Mount That Works in Either Position
No need for moving parts or constant adjustments—this is a fixed design built to stay solid. It fits 2" x 2" receivers and can be used in either drop or rise position without changing its 8,000-lb rating. Just attach your 1"-shank hitch ball, slide it into place, pin it down, and tow with confidence.
Specs
Application
- Application: 2" x 2" trailer hitch receivers
Weight and Capacity
- Gross towing weight: 8,000 lbs
- Tongue weight: 2,000 lbs
Dimensions
- Overall length: 15-1/2"
- 11-1/2": From center of hitch pin hole to center of ball hole
- 2-3/4": From center of hitch pin hole to end of shank
- 4": From center of hitch pin hole to closest edge of shank support
- Rise: 8-3/4" from top of inside of hitch opening
- Drop: 10" From top of inside of hitch opening
- Ball hole diameter: 1"
- Pin hole diameter: 5/8"
Warranty
- Warranty: 2-Year limited warranty
AMSC-10 Convert-A-Ball Cushioned Ball Mount for 2" Square Receiver - 8-3/4" Rise or 10" Drop - 8,000 lbs GTW - 2,000 lbs TW
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.9
1395 reviews
by:
Dave Y.
03/09/2015
I purchased the AMSC10 because I needed a 10" drop hitch to tow my lowboy enclosed trailer with my lifted Toyota Tundra.
I tried several other types of hitches with this towing combo and I was always disappointed. Mostly because of the fit/sloppiness of the ball mount into the receiver. This would cause a lot of noise and the feeling of the trailer "bucking" while hitting bumps and such. The other hitches that I tried were those cool aluminum ones, both a fixed one and an adjustable one. Although they were pretty, both left me very disappointed.
The shipping for this hitch from Etrailer was fast and efficient. I received emails informing me of my order status throughout the whole process. Upon receiving my AMSC10, I tested it out and found it to be a much nicer fit into the receiver.
Once I hooked up to the trailer and began to tow, the difference was extremely noticeable. This hitch is quiet, it doesn't buck, and in fact, comparatively, you wouldn't even know the trailer was behind you unless you looked.
I am actually really excited about towing with this hitch. I know it sounds goofy, because it is, but it makes the task so much more pleasurable with the cushion ball mount. I'm already thinking about buying the 8" drop for my normal trailers.
I tried several other types of hitches with this towing combo and I was always disappointed. Mostly because of the fit/sloppiness of the ball mount into the receiver. This would cause a lot of noise and the feeling of the trailer "bucking" while hitting bumps and such. The other hitches that I tried were those cool aluminum ones, both a fixed one and an adjustable one. Although they were pretty, both left me very disappointed.
The shipping for this hitch from Etrailer was fast and efficient. I received emails informing me of my order status throughout the whole process. Upon receiving my AMSC10, I tested it out and found it to be a much nicer fit into the receiver.
Once I hooked up to the trailer and began to tow, the difference was extremely noticeable. This hitch is quiet, it doesn't buck, and in fact, comparatively, you wouldn't even know the trailer was behind you unless you looked.
I am actually really excited about towing with this hitch. I know it sounds goofy, because it is, but it makes the task so much more pleasurable with the cushion ball mount. I'm already thinking about buying the 8" drop for my normal trailers.
by:
John A.
11/25/2016
This is such a great idea! It works flawlessly with my Jeep Wrangler and my Offroad trailer. The dampening incorporated into the hitch makes my ride so much smoother. I used to hear the clanking, tapping and banging while braking and while trailering offroad, but not any more! I highly recommend this hitch to anyone.
by:
Rigby
09/13/2021
I'm running an F350 King Ranch 4x4 with all terrain tires mounted on the factory wheels. The 10" drop Convert-a-ball mount works perfectly with the Curt 2 5/16 rocker ball. I'm also running the large rear stone guards to protect the 5th wheel and boat from stone damage. That stone guard system mounts to the ball mount and requires a minimum distance of 10 1/2" from the center of the ball hole to the center of the lock pin hole. This ball mount I believe is 11.5" and works perfectly. I am very pleased with this product with it's 8k rating.
by:
Andy
08/20/2020
Quick delivery from etrailer and looks high quality as I expected and I also ordered the Brophy 2" hitch ball.
My truck is a 2020 Chevy 2500HD with a 5.5" Pro Comp lift and the 10" drop puts the middle of the tow ball 20.5" from the ground.
My truck is a 2020 Chevy 2500HD with a 5.5" Pro Comp lift and the 10" drop puts the middle of the tow ball 20.5" from the ground.
by:
Michael
10/19/2026
Exactly what I needed.
by:
Tim
06/05/2019
Great selection of products. Found exactly what I needed. Fast shipping. Great products.
by:
James V
11/22/2016
Have not towed with it yet but looks like what I need for my Motot Home. Arrived in two days as promised. Well packed and undamaged. I will deffinately use E-trailer for any further towing needs.
by:
R.
07/08/2016
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11".
The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff.
Thanks to Patrick and the Crew at etrailer for their help with this selection.
The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff.
Thanks to Patrick and the Crew at etrailer for their help with this selection.
by:
Terry G.
07/08/2016
This particular 10" drop hitch ball mount was the right mixture of quality, features, and low price. It appears to be quality built, and the shock cushioning is an unexpected plus. I used it right away today when I received it to tow my utility trailer to Lowe's. The trailer made less noise and rattling around in the receiver with this product. I have a lifted Jeep Wrangler and the 10" drop leveled out the trailer pretty well. Also happy the AMSC10 is made in the U.S.A. ! Ordering process and follow-up by e-trailer were first rate. Appreciate the additional quick delivery.
Terry G.
7/8/2017
Still doing great! Have used it several times and works well.
by:
John V.
07/20/2020
I have the 10" drop/8" rise version of this drawbar. My experience with it over the past year and about 8,000 miles of flat-towing my 5000# has overall been good. I use a Sprinter 3500 Class B motorhome as my tow vehicle, so I'm towing at just about the maximal weight rating for towing.
I like that it has some "cushion" for the back and forth one experiences with flat-towing. However, it does have some looseness of the hitch pin holding this draw bar in the hitch platform, and there is still some rattling back and forth as this looseness is taken-up before the rubber cushion is engaged to soften the jostling. I use a floor-mounted inertial tow-braking device in my Jeep, so there's always some lag in when the brakes will engage. I think I have less rattling with another standard draw bar when I use a hitch tightener that clamps the tow bar in the hitch platform; but although that system eliminates the rattle, using that clamp would not allow the cushioning to work.
Overall, this isn't perfect, but it does do what it claims to do. The one improvement I'd make would be to figure a way to firmly attach the tow-vehicle end of this tow bar in the hitch platform while still allowing the cushioning to function.
I like that it has some "cushion" for the back and forth one experiences with flat-towing. However, it does have some looseness of the hitch pin holding this draw bar in the hitch platform, and there is still some rattling back and forth as this looseness is taken-up before the rubber cushion is engaged to soften the jostling. I use a floor-mounted inertial tow-braking device in my Jeep, so there's always some lag in when the brakes will engage. I think I have less rattling with another standard draw bar when I use a hitch tightener that clamps the tow bar in the hitch platform; but although that system eliminates the rattle, using that clamp would not allow the cushioning to work.
Overall, this isn't perfect, but it does do what it claims to do. The one improvement I'd make would be to figure a way to firmly attach the tow-vehicle end of this tow bar in the hitch platform while still allowing the cushioning to function.
by:
Rick T
09/08/2016
Works great no jerking or bucking when towing sometimes forget I am towing. Arizone to Califorina
by:
Barry
08/16/2025
Works perfectly. Tows my enclosed trailer nicely!
by:
Phillip
11/27/2019
Just what I needed, new truck with 20 inch tires, GVW 8000lbs, could not of been more pleased. Great web site, details you need, super fast shipping. Will be back in the future.
Thank you
Thank you
Phillip M.
12/1/2020
Be a year, excellent tow hitch, the more I use it the better I like it. I tow across open terrain and the cushion softens the jerking back and forth. My grandson wanted the hitch for his new truck, gave him your web site and the money to purchase it. KEEPING MY.
by:
Ted
04/27/2016
GREAT 10" DROP HITCH, WAS NOT SURE IT WAS BEEFY ENOUGH TO HANDLE 1600 LBS OF TONGUE WT. BUT NO PROBLEM. BEST FEATURE IS THE POLYURETHANE BUSHING THAT THE PIN GOES THROUGH. IT TAKES AWAY ALOT OF THAT ROUGH BANGING WHEN STARTING, STOPPING AND SMOOTHER RIDE THEN HITCHES W/O THE BUSHING. VERY PLEASED!!
by:
David
09/07/2022
With our trailer weighing in at only 1,500 lbs, this drop hitch is seriously overkill. It functions as advertised and is well made. However, when towing our light trailer it clunks vertically each time we go over a bump in the road or start and stop. The mount on the drop hitch is a little small for our receiver.
by:
Robert
02/07/2023
Works great. Needed the drop to tow a utility trailer at level.
Robert
2/8/2024
It works for my application.
by:
Jack M.
04/23/2019
This drop hitch is exactly what I needed and as described. I have pulled cargo trailers, boats and even moved a camper to the lake and it worked perfectly. The experience with the order process and shipping was great!
Thanks etrailer for everything!
Thanks etrailer for everything!
by:
PA
06/28/2021
I bought this as my new truck was much higher than the old one. The purpose was to pull a small horse trailer. The cushioned hitch helps minimize the jolts and noise while towing. Hitch has served well. Price was good, good hitch.
by:
PJH
08/06/2018
Bought a new tow vehicle and needed a longer drop down shank for my travel trailer. No one locally had this size in stock and all wanted to charge an arm & leg to "special order" it for me. I politely turned them down and came here to etrailer.com to order it myself. Website was extremely easy to navigate to find the one I needed, including providing me with detailed examples of how to figure out which length I needed. Ordered this item and the 2.5" - 2" adaptor with 3 day shipping, and both arrived in 2 days! Tested them out to make sure they fit my hitch (they did) and then over to make sure they would leave my trailer level for towing (it is).
Very pleased with etrailer.com and am already looking at items on here to start customizing my new truck with. Thanks!
Very pleased with etrailer.com and am already looking at items on here to start customizing my new truck with. Thanks!
by:
Kevin J
07/07/2020
The hitch, pricing and service I received from etrailer were excellent. The hitch I got was a replacement for one that someone else liked so much they stole mine. I am sure they are impressed with the product as well :-)
Seriously good site and excellent product.
Seriously good site and excellent product.
by:
Steve G.
08/13/2013
I used this on my 94 chevy crewcab 3500 4 x 4.It has a 6" lift and 35" tires. It was hard to pull my camper in certain spots since the back was always dragging. With this new hitch it pulls level and it seems to not jerk back and forth near as much. I love it!!!!!!
by:
Shawn W
02/12/2017
Works great! I got a 2012 Rams 3500 with 33s on it. Now most of my trailers can ride level once again. The dampener where the pin goes through from the receiver is a nice touch as well.
by:
Mark
04/01/2013
Ordered this because it was one of the few 10K rated 10in drop hitches.
I am totally happy I did. Construction and fit were great and it worked great w/ my 2 and 5/16 ball to pull my horse trailer.
I am totally happy I did. Construction and fit were great and it worked great w/ my 2 and 5/16 ball to pull my horse trailer.
by:
Gary D.
08/08/2017
Hitch has operated perfectly for the past year. I like the urethane shock absorber that cushions the forward movement of the trailer. It was used on a 24' enclosed cargo pulled by an F350 with 8" of lift.
25
1395
true
Show More Reviews
See what our Experts say about this Convert-A-Ball Trailer Hitch Ball Mount
- Recommended Tire Chains For 16.00R20 Michelin Tires Hey Mark, The Titan Chain Alloy Loader Double Duty Tire Chains # TC2627S-2 would be the correct size for your tires but are super heavy duty and more so designed for a tractor tire so they might be a bit too heavy for your application. I did speak with Titan Chain and they stated that they would just custom make you some for your tire size with thinner links to reduce the weight to something a bit more manageable for your intended use. To put this in perspective these chains weigh 189lbs...
view full answer...
- How to Choose Correct Ball Mount Rise/Drop for a 2022 Nissan Rogue with etrailer Hitch ReceiverThanks for reaching out and your purchase of the etrailer Trailer Hitch Receiver # e93ZR for your 2022 Nissan Rogue! To choose the correct ball mount you'll need to figure out the difference between the height of your hitch receiver and your trailer coupler. To measure your hitch receiver height you'll measure from the ground to the top inside of your receiver. When we installed this on a 2021 Rogue we found this height to be 11-3/4". Then for your trailer coupler height you'll need to...
view full answer... - Can Convert-A-Ball Ball Mount AMSC10 Be Used In The Rise And Drop Position?Hello Steve, thanks for reaching out. Yes, the Convert-A-Ball Ball Mount for 2" Hitches # AMSC10 is ok to use in the rise or drop position. The weight capacity is 8,000 lbs towing 2,000 tongue weight and this will not change if the ball mount is flipped. What kind of trailer are you planning to use it with?
view full answer... - Recommendation to Help Back and Forth Movement in Trailer Hitch While TowingTo help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement and additional road shock with its polyurethane cushioning interior; if you take a look at the accompanying diagram it displays the cushioned inside of the ball mount. I will list the different rise and drop available for this ball mount below....
view full answer...
- Adjustable Ball Mount with Long Shank for 2" Ball Mount with 8" RiseTo answer your question first- Yes. You are able to use the Blue Ox Sway Pro Weight Distribution Shank # BXW4003 as a standard rise/drop ball mount. To make it a complete towing setup, you need to add the Ball Mount Adapter # BA-1 , which works with shanks that have 1-1/4" adjustment increments. Using this setup will give you around 14" of distance from the center of the hitch pin hole to the center of the hitch ball. The other option, which would be a more economical choice if you don't...
view full answer...
- Distance from hitch Pin Hole Center to Ball Hole Center on Ball Mount # AMSC10I went out to the warehouse and pulled a Cushioned Ball Mount, # AMSC10, to measure. From the center of the hitch pin hole to the center of the ball hole measures 11-1/2 inches. I have included a link to our FAQ article on choosing the correct ball mount for you to view. The Draw-Tite Trailer Hitch, # 75579, is the most popular model for a 2008 Dodge Grand Caravan. I have included a link to the installation details and a link to a video showing a typical installation for you to view. For...
view full answer...
- Gen-Y Shock Absorbing Ball Mount Orientation and CompatibilityThere is a correction for the Gen-Y Glyder Shock Absorbing Ball Mount # 325-GH-12005. It is only capable of being mounted in the drop position. To get the rise you are looking for in a shock absorbing style hitch I recommend the Convert-A-Ball Ball Mount # AMSC10. This allows for 8-3/4"" or rise and 10" drop.
view full answer... - Recommended Ball Mount with Best Ground Clearance and 10 Inch DropThe Fastway Flash E Series HD Adjustable Ball Mount # FA42-00-2925 referenced in your question has a distance of 16 inches from the top of the shank to the bottom of the unused hitch ball when set at its lowest position. This will certainly provide some ground clearance issues on your Silverado when going down the driveway. If you are needing a 10 inch drop, a better option as it relates to ground clearance might be to go with a standard ball mount like the Convert-A-Ball # AMSC10. This...
view full answer...
- Towing Capacity of Fixed Ball MountsThe Convert-A-Ball Ball Mount for 2" hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs item # AMSC10 that was previously referenced is a superior hitch to the Brophy 10" drop item # BM10. It is a stronger reinforced hitch that has a higher weight capacity of 8,000 lbs over the Brophy which only has a 7,500 lbs limit. The use of the Convert-A-Ball fixed mount item # AMSC10 will not reduce your vehicle, hitch, or hitch balls towing capacity. For a fixed ball mount with a 5" rise I recommend the...
view full answer... - Will a Cushioned Ball Mount Work with Surge Trailer BrakesThe cushion inside of the Convert-A-Ball cushioned ball mount # AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it gets. It would take more force to compress that cushion than to actuate the surge coupler. Cushioned ball mount # AMSC4 has a 2-3/4 inch rise or 4 inch drop but there are other options if you need a different rise or drop to tow the trailer level: #...
view full answer... - Hitch Ball Height of Stealth SH87FR Hitch Installed on 2019 Volvo XC90The receiver included with the Stealth # SH87FR hitch for the 2019 Volvo XC60 isn't meant for towing, it's meant for hitch mounted accessories like bike racks or cargo carriers. In order to tow, you'll need the # SH87FRT hitch kit which includes the ball mount that's meant for towing which provides a 2 inch rise which will place the top of the trailer ball around 18 inches which wouldn't be sufficient to tow your trailer so it's level. Unfortunately, this height isn't adjustable. I'd recommend...
view full answer... - Ball Mount for EcoHitch of 2016 Subaru Crosstrek Towing Rental TrailerFor a ball mount to use with your EcoHitch # 306-X7203 installed on our 2016 Subaru Crosstrek that would have it's hitch height at roughly 16-1/2 inches from the ground you'd need a rise of 8-1/2 inches roughly if the 25 inch dimension U-Haul gave you would give you a level trailer ride height. That does seem like a high figure but if that's what they gave you I'd assume it's best number to go off. So based on that you'd want a ball mount like the part # AMSC10. Then for a 2 inch ball...
view full answer... - Fixed Ball Mount or Adjustable Ball Mount for 10 Inch RiseI have a couple of options for you. To answer your question first, you will not have to worry about loss of tow capacity with the 10" rise you are looking for. Both of the options I am going to give you will be well over the towing capacity of your 2010 Honda Odyssey so you won't have to worry about the ball mounts not being rated high enough. The first option is the Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop item # AMSC10. This fixed ball mount is slightly shorter...
view full answer... - What is Clearance From Hitch Pin Hole to Welded Gusset on Brophy Trailer Hitch Ball Mount # BM10On the Brophy Trailer Hitch Ball Mount # BM10 the distance from the center of the hitch pin hole to the nearest edge of the welded support gusset is 3-3/4. Please note that use of this ball mount with its 10-inch drop will have the effect of reducing your hitch's capacity by 1/3. It can neither be used with extenders nor used in an inverted position. I checked all available ball mounts with 10-inches of drop (all can be seen on the link provided) but none offers the 5-1/4-inches of clearance...
view full answer... - Recommended Trailer Hitch Ball Mount for 9 Inch Drop To Level Coupler HeightIt sounds like you want a fixed style ball mount. For that, I recommend the Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs # AMSC10. This will give you the drop needed plus a little to allow the trailer to sit slightly forward instead of slightly raised which allows for better tracking and sway control than the latter. This also has a built in cushion for comfort. You will also need the 2-5/16" Hitch Ball # C40007 or # 40038. If you want the level towing...
view full answer... - Ball Mount Recommendation with 10 inch DropFor a ball mount with a 10 inch drop we have the part # AMSC10 which would work well. It has a 8k capacity plus a cushioned pin hole. Check out the review video I attached for more info.
view full answer... - Hitch and Ball Mount Solution for 2012 Audi A4 for 8-1/2 inch RiseThe issue with Class I hitches like the Curt you have installed on your 2012 Audi A4 is that you can only use the recommended ball mount since it's a lower capacity hitch. Since you have a Curt hitch that's Class I you'd have to use the # C45521 which only has a rise of 2-5/8 inches. There's a 2 inch hitch that fits your 2012 Audi A4 with the EcoHitch part # 306-X7324 which would allow you to use a ball mount with a rise close to what you need like with the # AMSC10 which has an 8-3/4...
view full answer... - Recommendation For 10 Inch Drop Ball Mount For Towing Dolly And Bike Rack For RVThe Convert-A-Ball Ball Mount With 10 inch Drop, Item # AMSC10, should work well for you. It has an overall shank length of 15-1/2 inches. A key measurement for your project will also be from center of hitch pin hole to nearest part of the drop which is approximately 4-1/4 inches (see picture). This amount can vary slightly depending on the welds. I called the manufacturer and the Swagman Traveler Rack, Item # S64664, might work with the Convert-A-Ball Mount but you must have at least...
view full answer...
- Determining Trailer Hitch Ball Mount Rise Needed for Trailer CompatibilityThe Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs # AMSC10 you referenced measures the rise from the inside top of the receiver to the top of the hitch ball platform not the top of the hitch ball itself because the coupler fits over it. I've attached an article to assist. Use the article to help you with official measurements. Based on what you describe it sounds like you may need a 4 inch rise if I understand your measurements. I've linked the page to...
view full answer... - Ball Mount with 10 inch Drop AvailabilityFor a 10 inch drop ball mount we have the 8k # AMSC10 which also happens to be a cushioned ball mount. Which then for a hitch ball you would want # 40038 for a 2 inch ball or part # C40007 for a 2-5/16 inch ball.
view full answer... - Can Roadmaster High-Low Hitch Adapter # RM-048-10 be Used When Towing Car DollyIf you are looking to lower the hitch height of your tow vehicle by 10" in order to tow your 2015 Hyundai Elantra with a tow dolly, I recommend taking a look at the Cushioned Ball Mount for 2" Hitches, # AMSC10. This ball mount was designed with towing in mind and offers a tongue weight capacity of 2,000 lbs and a towing capacity of 10,000 lbs. The Roadmaster High-Low Hitch Adapter, # RM-048-10, was designed for use with tow bars and is not for use with any style of trailer or car dolly. The...
view full answer... - Best Fixed Ball Mount Option for Motorhome and Tow Dolly Compatibility with 10-11 Inch DropThe Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs # 80248 will bring your hitch height to 14 or 15 inches to match your tow dolly. The ball mount is rated for up to 5,000 lbs n the drop position so you simply need to use a hitch ball rated for 3,750 lbs or more. I recommend the 2 inch ball # 63845 or the 2-5/16 inch ball # 63847 depending on which matches your coupler. Both are rated for 7,500 lbs so they will work well. The Convert-A-Ball Ball Mount...
view full answer...
- What Size Hitch Ball Does the Cushioned Ball Mount for 2 Inch Hitches # AMSC10 Use The Cushioned Ball Mount for 2 inch Hitches with 8-3/4 Inch Rise or 10 Inch Drop, # AMSC10, uses a hitch ball with a shank diameter of 1 inch. For a 2 inch hitch ball you will need part # 63845 and for a 1-7/8 inch hitch ball you will need # 19260. Since the Cushioned Ball Mount, # AMSC10, has a ball hole diameter of 1 inch, a hitch ball with a 1-1/4 inch shank will not work.
view full answer... - Ball Mount With Single Hitch Ball And 10 Inch Drop Compatible With 2 Inch RecieverFor a similar style to the # FA49-00-5900 only with a singe ball, I recommend the Weigh Safe 2-Ball Mount w/ Built-In Scale - 2" Hitch - 10" Drop, 11" Rise - 12.5K # WS10-2. There is not a single hitch ball mount without the scale in this capacity range with an adjustable 10 inch drop and 2 inch shank, but the scale is a really nice feature to ensure you are towing that large a load properly. For a cushioned fixed ball mount with a 10 inch drop I recommend the # AMSC10 that can be used...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Test Fit:
Patrick B
Test Fit:
Rick A
Test Fit:
Matthew K
Test Fit:
Cole B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Installed by:
Randy B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Mike S
Video by:
Zach D
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
R.
7/8/2017
1 year later... Hitch is still working fine. Tows the trailer like its not even back there.