2004 Ford F-250 Super Duty Trim Kits

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

Yes it is possible to put a platform rack on your 2024 Toyota RAV4 with the panoramic roof, and the Yakima LockNLoad is a great choice. Fitment will just depend on what kind of rails are on the roof of your car. For factory flush mounted rails you…

Hi Jason; it looks like your 2022 Yukon towing capacity is 7,500-7,900 lbs so I'm not surprised you're getting that rear sag. The best solution is going to be a weight distribution hitch. This will keep you level and also help reduce trailer…

The trailer hitch receiver that fits your 2024 Toyota RAV4 and has the best clearances - both bumper clearance and ground clearance - is the EcoHitch, with the correct fit for the '24 RAV4 being the following: - EcoHitch Hidden Trailer Hitch…

Hey Tom, thanks for reaching out! The DeeMaxx Tee Fitting #DE54SR has three 3/16" female fittings that have a 3/8"-24 thread size. What brand brake kit are you needing a replacement part for?

Hey Scott! For your 2022 Hyundai Kona N Line I recommend the Curt #C87DR (1-1/4" receiver) or #C98QV (2" receiver). What are you using the hitch for? Since the Class III with a 2" is available I would choose that over the 1-1/4"…

Hey Timothy, this is a great question but what Curt means by vertically in terms of bike racks for the Curt hitch part #C47MJ is a different style of bike rack but I can see the confusion. For example a vertical bike rack is the Yakima HangTight part…

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

Hey Larry, we do have the Roadmaster base plate kit part #RM87NQ that is a confirmed fit for your 2025 Ford Maverick Hybrid. Since you have a Blue Ox tow bar you'd also need the adapter part #BX88185.

Hey Brian, the torque value for the bolts of the GM Gen-Y Gooseneck Adapter part #GY55XR is 23 ft lbs. I attached a picture of the manual.

Hey Alex! The legs on the Front Runner Roof Rack item #FR45MJ are adjustable between 2.9"-3.3" tall. The load bars are just under 1" thick. Together they are going to sit 4.25"-4.65" tall above the OEM rails. I do not know…