Total Height of Spring, Bracket and Spacer on Timbren Rear Axle Spring Kit # TFR250SDE

Question

Question:

Can you tell me the total height of the spring, bracket and spacer. I would like to take a measurement of my truck before placing my order. Thanks

asked by: Mark

0

Expert Reply:

The Timbren rear axle jounce spring kit for Ford trucks that you referenced, part # TFR250SDE, is a correct fit for the 2002 F-250 Super Duty. This kit will fit both 2-wheel-drive and 4-wheel-drive versions and installs without drilling.

The attach photo shows the dimensions of each of the main components in this kit. The springs are 5-1/16-inch tall, the spacer is 1/2-inch thick x 3-7/8-inch diameter, and the overall height of the bracket is 2-inches.

I have linked both the written installation instructions and a video showing this kit being installed in your same year/make/model truck.

expert reply by: Adam R

0

click to enlarge

Answer 1

Timbren kits like the part #TFR350SDE and the #TFRTT350E both can be used on vehicles with lift kits installed. Timbren makes spacers that can be added to the kits to take up the extra room created by the lifts. We have 1 inch spacers like the part…

view full answer...

Answer 2

I have attached a photo of the #RP50082-58 bracket installed on a truck like yours. As you can see, there is no interference with the bump stop you have installed on the truck. I recommend the Timbren Rear Suspension Enhancement System, part…

view full answer...

Answer 3

Unless you'd be interested in going to a different suspension enhancement setup we won't have a solution since all of the gooseneck hitches we offer mount on the outside of the frame rails where your current air bag brackets are. The B and W…

view full answer...

Answer 4

Hey Kevin, we have the Firestone Ride Rite kit part #F2550 that fits your 2000 Ford F-250 with a gooseneck hitch so this would work great for you. This checks out based on the pictures you sent in as well. Is your truck sagging quite a bit when…

view full answer...

Answer 5

There is a big difference between the two Timbren kits that fit your 2003 Ford F-250, as the #TFR250SDE is for applications like towing a 5th wheel trailer or travel trailer, and the #TFRTT350E is for service trucks or work trucks. They are not the…

view full answer...

Answer 6

It sounds like you're looking for the Buyers Products Truck Mud Flaps part #337B30LXP which measures 24" wide x 30" tall x 3/8" thick. These are made of durable rubber which is very strong, have pre-drilled holes for an easy…

view full answer...

Answer 7

Hello Karen, thanks for reaching out. We should have the hub you need, but I will need a bit more information from you first. There are a few possible bearing combinations for the 6K axles, and we want to be sure you are getting the right thing. The…

view full answer...

Answer 8

Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…

view full answer...

Answer 9

From what I can see it looks like the Timbren Rear Suspension #TFR250SDE will fit with the Air Lift LoadLifter 5000 #AL88298 on your 2004 Ford F-250. The Air Lift brackets have an opening that will fit around the mounting hardware for the Timbrens.…

view full answer...

Answer 10

If the leveling kit you installed raised the suspension (moved the axle further from the frame) then you will need to use a spacer with the Timbren part #TFR250SDE. For that we have the part #A25723-90AH00 which is a 1 inch spacer. The longer bolts…

view full answer...

Answer 11

A space of 5-5/8 is very little. Especially on a lifted truck. It sounds like you're not measuring the correct location or your suspension is pretty worn out. The Timbren #TFR150SDE system you're looking at is the correct kit for your 1999…

view full answer...

Answer 12

Yes, the spacer is included with the Timbren kit part #TRF250SDE and this is a confirmed fit for your 2003 Ford F-250. We have an 8k kit too with the part #TFRTT350E but there isn't a way to upgrade one from the other though. I would go with the…

view full answer...

Total Height of Spring, Bracket and Spacer on Timbren Rear Axle Spring Kit # TFR250SDE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching