Cargo Van Mats Specs:
Features:
This cargo van floor mat looks and feels like soft carpet but stands up to rugged use. The 3/4" thick cushioning adds cargo protection plus dent resistance for your vehicle's floor, and the non-skid surface is perfect for fragile loads.
More Information >Cargo Van Mats Specs:
Features:
Protect the floor of your vehicle and get a slip-resistant, heavy-duty thermoplastic work surface backed with a 1/2" thick cushion for your load. A durable VanTred cargo van mat is great for tough, commercial applications and frequent use.
More Information >Videos
for Cargo Van Mats
Help Articles
for Cargo Van Mats
Expert Answers
for Cargo Van Mats
There are 4 slits in the VanTred Custom Floor Mat for Cargo Vans #VTTC14L (see attached) that I believe are for the D-Rings you're talking about. If your D-Rings are in a different location then you can cut into the mat for access if you…
view full answer...We actually can offer you two choices in an interior mat for your 2019 Ram Promaster 1500 with the long 136-inch wheel base. Both come from Bedrug but they differ slightly in thickness and material so one may well be better for your specific…
view full answer...The best way to test your Redarc Tow-Pro Elite #RED44FR or Liberty #RED52VR brake controller is by cutting the blue wire coming out of it about 6" away from the controller and using a circuit tester to make sure power is coming out of the…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I spoke with my contact at BedRug and the VanRug Custom Floor Mat, #VRG96, was designed for the 1996 - 2014 Chevrolet Express Cargo Van with standard wheelbase. In order for this mat to work in your 2014 Chevrolet Express 3500 passenger van, you…
view full answer...There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388
view full answer...To hang a wiring connector from the Curt Trailer Hitch Receiver #C13388 on your 2021 Mercedes-Benz Sprinter 2500 you need a No-Drill Mount Bracket #C57202 and then you can use the Bracket #18144 for the 4-Way #C59236 or the Bracket #18138 for the…
view full answer...For your Sprinter 2500, I recommend the Curt Trailer Hitch Receiver #13358 that will do a great job for your bike carrier and more should you decide to tow later. This hitch model is designed for either the 144" or 170" wheelbase…
view full answer...The reason some ball mounts have different lengths is simply to allow for more clearance between the tow vehicle and trailer. Some people like a longer ball mount if, for example, they want to be able to open the tailgate of their truck when the…
view full answer...On the surface, there is a lot of similarities between the Curt Spectrum Trailer Brake Controller #C51170 and the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR, but the Redarc is truly the superior option in every way for your 2019 Audi Q5.…
view full answer...It sounds like you are needing to install a 7-Way connector at the rear of your 2005 Ford E-150. If your Ford Van did not come with the factory tow package (with a 7-way connector), then there will not be a built in socket or harness under the…
view full answer...We don't have specific dimensions for the #VRF92 but to answer you real question-it covers the entire floor from behind the front seats to under the cargo door's plastic shroud. I attached a picture that shows how it covers the floor of a…
view full answer...Filter Products (4)